Accessories Electrical
Fluke VPS210-R Voltage Probe Set 200MHz (10:1)
$357.67 CAD
Double insulated voltage probe for ScopeMeter 190 series.
Fluke VPS210-G Voltage Probe Set 200MHz (10:1)
$357.67 CAD
Each probe set includes: 600 V CAT III / 1000 V CAT II rated 10:1 Voltage Probe Hook Clip for Probe Tip Ground Lead with Mini Alligator Insulation Sleeve 30 V CAT II rated Ground Spring for Probe Tip
Fluke VPS101 Voltage Probe Set 30MHz (1:1)
$357.67 CAD
Double insulated voltage probe for ScopeMeter 190 series.
Fluke VL1735/45 Voltage Leads for Fluke 1735 and 1745
$930.23 CAD
Fluke TP920 Test Probe Adapter Kit
$80.23 CAD
Set of push-on adapters for TL71 and TL75 test probes IC test adapters, extended probe tips, medium alligator clips (max.opening 7.6 mm) CAT III 300 V, 3 A rating One year warranty
Fluke TP912 Replacement Tips for TL910
$65.27 CAD
Replacement tips for TL910 Five sets of gold plated and stainless steel tips One year warranty
Fluke TP88 Rigid Back Probe Pins
$57.11 CAD
Better than a test probe alone – these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and the pin's insulation protects it from shorting to other wires.
Fluke TP82 Insulation Piercing Clip Set
$129.19 CAD
Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.
Fluke TP81 Insulation Piercing Clip Set
$129.19 CAD
Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The Fluke TP81 connects to banana jack leads (such as Fluke’s TL224).
Fluke TP80 Electronic Test Probe Set
$72.07 CAD
One pair (red, black) IC insulated cap prevents shortening of IC legs for probing high density components or boards CAT III 1000 V, 10 A rating. UL listed One year warranty
Fluke TP74 Lantern Tip Test Probe Set
$42.15 CAD
One pair (red, black) Tips include banana-style spring contacts with nickel-plated brass ends CAT II 1000V, 10 A rating CAT III 1000 V rating only with protective cap One year warranty
Fluke TP40 Automotive Back Probe Pins (five)
$93.83 CAD
Flexible and formable 1-¼ inch pin provides an easy connection past weather pack seals to connector conductors. Tested to over 60 VDC, these pins are a must-have for fuel injectors, TPS and MAP sensors, as well as for any underhood or under vehicle connector with weather pack seals. The bright yellow body stands out in an engine compartment to e...
Fluke TP4 Slim Reach Test Probes
$40.79 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips 4 mm diameter probe tip designed to fit securely into IEC electrical wall outlets CAT II 1000 V, 10 A rating One year warranty
Fluke TP38 Slim Reach Test Probe Set
$43.51 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips Insulated Probe Tip CAT IV 600 V, CAT III 1000 V, 10 A rating. One year warranty
Fluke TP220 SureGrip™ Industrial Test Probes
$43.51 CAD
SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
Fluke TP2 Slim Reach Test Probes
$40.79 CAD
CAT II 1000 V, 10 A rating One year warranty
Fluke TP175E TwistGuard Test Probes w/4mm Adapters
$63.91 CAD
Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty
Fluke TP175 TwistGuard Test Probes
$62.55 CAD
Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty
Fluke TP1 Slim Reach Test Probes
$40.79 CAD
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips Flat blade design to hold securely in blade type electrical wall sockets CAT II 1000 V, 10 A rating One year warranty
Fluke ToolPak™
$74.79 CAD
The meter hanging solution: Solves almost any hanging and positioning problem you may face The universal hanger allows you to hang your meter on nails, hooks and many other objects Compatible with many Fluke instruments One year warranty