Accessories Electrical

Fluke TL220 SureGrip™ Industrial Test Lead Kit
$149.59 CAD
AC220 SureGrip™ Alligator Clip Set TP220 SureGrip™ Industrial Test Probe Set TL224 SureGrip™ Silicone Test Lead Set (straight to right) One year warranty

Fluke TL175E TwistGuard™ Test Leads
$42.00 CAD
Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty

Fluke TL175 TwistGuard™ Test Leads
$50.00 CAD
The Fluke TP175 TwistGuard® Test Probes have adjustable tip lengths that allow you to work safely in different settings.

Fluke TL1550EXT Extended Test Lead Set (25 ft.)
$720.79 CAD
3 test leads (red, black, green) connected to low-leakage probes 3 alligator clips (red, black, green) Test Leads extend to 25' 26mm maximum jaw opening Replacement test lead set for the fluke 1550B/1550C/1555 MegaohmMeter

Fluke SW90W FlukeView Scopemeter Software
$520.59 CAD
FlukeView scopemeter software helps in storing and retrieving waveforms, gathering measurement data, and performing waveform analysis.

Fluke STL90 Shielded Test Lead Set
$451.51 CAD
Industrial shielded, 1:1, silicone insulated test lead set. Useful bandwidth 1 MHz. Silicone insulated leads won't crack from cold or melt from accidental contact with hot surfaces. Superior strain relief and flexibility provide extra long life. Compatible with Fluke ScopeMeter Test Tools.

Fluke STL120-III Shielded Test Leads
$205.00 CAD
Specially designed for use with the Fluke ScopeMeter 120 Series. Compatible with AC120 Alligator Clips and HC120 Hook Clips. Safety designed ground leads included. Integral strain relieve and extra hard probe tips provide extra long service life. Features safety designed shrouded plugs and notched tip to prevent probe from sliding.

Fluke RS400 Replacement Set for VPS410-series probes
$205.00 CAD
Probe Accessory Replacement Set
Fluke RS120-III set of replacement accessories for STL120-III and VPS40-III
Accessories Electrical

Fluke RS120-III set of replacement accessories for STL120-III and VPS40-III
$178.00 CAD
Ground leads (2, black), safety rating 600V CAT III Hook clips (1 red, 1 grey), safety rating 600V CAT III 2 mm add-on testpins (1 red, 1 grey), 1000V CAT II

Fluke PM9093 Male BNC to Dual Female BNC Adapter
$129.19 CAD
Male BNC to dual female BNC T-piece. Set consists of two adapters. BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 Series shielded banana jack inputs.

Fluke PM9092/001 50 Ohm Coaxial BNC cable set
$161.83 CAD
50 Ohm Coaxial BNC cable set, 3 x 0.5 m Three colored BNC male connectors (red, gray, and black) for easy identification

Fluke PM9091/001 50 Ohm Coaxial BNC Cable Set
$179.51 CAD
Each set consists of three black cables with colored BNC male connectors (red, gray and black) for easy identification. Cable length is 1.5 m Maximum Signal Voltage: 300 V rms Maximum Voltage to Ground: 600 V rms. CAT III per IEC 61010-031 BB120 Shielded Banana to BNC Adapter is required to adapt to ScopeMeter 120 Series shielded banana jack ...

Fluke PM9082 Dual Banana Jack female to male BNC Adapter
$91.11 CAD
The set consists of two adapters. One red (signal) and one black (ground) 4-mm banana contact. Maximum Signal Voltage: 600V rms Maximum Voltage to Ground: 600V rms. CAT III per IEC 61010-031

Fluke PM9081 Dual Banana Plug Male to Female BNC Adapter
$91.11 CAD
The C1600 is a rugged, molded plastic case designed to carry Fluke handheld digital multimeters and process calibrators and most accessories used for these meters.

Fluke PM9080 Optically Isolated RS-232 Adapter Compatibility
$451.51 CAD
Optically Isolated RS-232 Adapter/Cable.

Fluke OC4USB USB Interface Cable
$370.99 CAD
Safety-designed interface cable to connect the optically-isolated serial interface port of Scopemeter or Power Quality Analyzer to a standard USB-interface on your PC. Optical isolation allows you to float your instrument at mains voltages or beyond, while being connected to your PC. Supports the Fluke 120 Series and Fluke 190 Series ScopeMet...

Fluke LVD1A Volt Light
$66.65 CAD
Non-contact AC voltage detector and LED flashlight combined into one easy to use pen-style design. The LVD2 is a CAT IV 600 V rated non-contact detector that is suitable for commercial and industrial applications. The LVD2 includes dual sensitivity turning blue 1" to 5" (2.54 cm to 12.7 cm) from the source and red when at the source.

Fluke L215 SureGrip™ Kit with Probe Light and Probe Extender
$209.99 CAD
L200 Probe Light Tp280 20 cm Test Probe Extenders TP220 SureGrip Test Probes TL224 SureGrip Silicon Test Lead Set Foldable soft pouch with six pockets and hook-and-loop

Fluke L211 Probe Light Kit
$135.79 CAD
Special value combo pairs the new L200 Probe Light with one of the most popular test leads by Fluke and a handy carrying case.

Fluke L210 Probe Light Kit
$103.59 CAD
Bright white LED illuminates contact area 8" probe extenders keep hands away from live circuits Extender fits between modular test probe and test lead Small, rugged light frees both hands for work 120 hours of battery life Uses 2 3-volt watch batteries