{ "id":6939387461822, "title":"Fluke Networks LIQ-KIT-IE Industrial Ethernet Cable and Network Tester Kit","handle":"fluke-networks-liq-kit-ie-industrial-ethernet-cable-and-network-tester-kit", "description":"\u003cp\u003e\u003cspan\u003eThe LinkIQ Cable+Network Tester is the testing solution to verify cable performance up to 10 Gb\/s and solve network connectivity problems. LinkIQ validates cable performance using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. The LinkIQ also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare PC.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThe LinkIQ™ is capable of measuring lengths up to 1000 feet (305 m) and provides distance to faults such as opens, shorts, and unterminated cable.\u003c\/p\u003e\n\u003cp\u003eThe included MS-IE Remote Adapter allows to identify mis-wired and split pairs on RJ45, M12X, M12D, and M8D terminated cables.\u003c\/p\u003e\n\u003cp\u003eThe LinkIQ™ supports EtherNet\/IP, PROFINET, EtherCAT and other Industrial Ethernet and qualifies the cabling bandwidth from 10BASE-T to 10GBASE-T (10 Mb\/s up to 10 Gb\/s) and also provides nearest switch diagnostics including advertised data rate, switch name and port number and VLAN information, plus PoE testing and load test up to Class 8 (90W).\u003c\/p\u003e\n\u003cp\u003eIncludes LinkIQ™ Main Unit, Remote ID #1-7, IntelliTone(TM) Pro 200 Probe, RJ45-RJ45 patch cord (M-F), RJ45-RJ45 patch cord (M-F), Quick Reference Guide,AC charger, RJ45\/11 universal coupler, RJ45\/M12X patch cord, RJ45\/M12D patch cord, RJ45\/M8D patch cord, RJ45\/11 Modular Adapter, Hanging strap with Remote ID holder, and duffle bag carry case.\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-striped\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eActive Network Diagnostics\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostic Protocols\u003c\/td\u003e\n\u003ctd\u003eLink layer discovery protocol (LLDP)\u003cbr\u003eCisco discovery protocol (CDP)\u003cbr\u003eFast link pulses (FLP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNearest Device Diagnostics (If available through Diagnostic Protocols)\u003c\/td\u003e\n\u003ctd\u003eSwitch name\u003cbr\u003ePort number\u003cbr\u003eVLAN ame\u003cbr\u003eAdvertised data rates\u003cbr\u003eAdvertised duplex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Over Ethernet Compatibility\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3af\/at (SW v 1.0)\u003cbr\u003eHardware negotiation with signature resistance\u003cbr\u003eSoftware negotiation with LLDP\/CDP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Over Ethernet Diagnostics\u003c\/td\u003e\n\u003ctd\u003eAdvertised power class (1 to 4), SW v 1.0\u003cbr\u003eAdvertised available power\u003cbr\u003ePowered pairs\u003cbr\u003eDiagnostics for both single and dual signatures\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Over Ethernet Measurements\u003c\/td\u003e\n\u003ctd\u003eLoaded voltage (V), Loaded power (W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePort Blink\u003c\/td\u003e\n\u003ctd\u003eBlink the light of the connected port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eCable Test Specifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTest Port\u003c\/td\u003e\n\u003ctd\u003eShielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommissioning Autotests\u003c\/td\u003e\n\u003ctd\u003e10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map only\u003cbr\u003eTest Speed: 6 seconds for lengths \u0026lt;229' (70 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Types\u003c\/td\u003e\n\u003ctd\u003eBalanced twisted-pair cabling\u003cbr\u003eUnshielded twisted-pair\u003cbr\u003eScreened twisted-pair\u003cbr\u003e2-pair and\/or 4-pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Map-Only Tests\u003c\/td\u003e\n\u003ctd\u003eDocument wire map\u003cbr\u003eLength of each pair\u003cbr\u003eDiagnose split pairs\u003cbr\u003eUser selectable T568A or T568B\u003cbr\u003eUser selectable crossover settings (straight through, half-crossover, full-crossover)\u003cbr\u003eTest speed: 1 second for lengths \u0026lt;393' (120 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength (Maximum)\u003c\/td\u003e\n\u003ctd\u003e1000' (305 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Velocity of Propagation (NVP)\u003c\/td\u003e\n\u003ctd\u003eUser settable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTone Generator\u003c\/td\u003e\n\u003ctd\u003eGenerates digital tones compatible with Fluke Networks IntelliTone probe\u003cbr\u003eGenerates analog tones compatible with general analog probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote ID Locators\u003c\/td\u003e\n\u003ctd\u003eUse remote ID terminations to identify up to 7 unique ports or office outlets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\u003cstrong\u003eGeneral Specifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e800 x 480 color capacitive multi-touch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003eOperating: 32 to 113°F (0 to 45°C)\u003cbr\u003eStorage: -4 to 122°F (-20 to 50°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Relative Humidity\u003c\/td\u003e\n\u003ctd\u003e0 to 90%, 32 to 95°F (0 to 35°C)\u003cbr\u003e0 to 70%, 95 to 113°F (35 to 45°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Altitude\u003c\/td\u003e\n\u003ctd\u003e13,123' (4000 m)\u003cbr\u003e10,498' (3200 m) with AC adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration\u003c\/td\u003e\n\u003ctd\u003eRandom, 2 g, 5 to 500 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrop\u003c\/td\u003e\n\u003ctd\u003e39\" (1 m) drop, 6 sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery\u003c\/td\u003e\n\u003ctd\u003eType: Lithium-ion, 3.6 V, 6400 mAh\u003cbr\u003eLife: 8 hours typical\u003cbr\u003eCharge time: 4.5 hours\u003cbr\u003eCharging temperature range: 32 to 104°F (0 to 40°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Adapter\u003c\/td\u003e\n\u003ctd\u003eInput: 100 to 240 V AC ±10%, 50\/60 Hz\u003cbr\u003eOutput: 15 V DC, 2 A maximum\u003cbr\u003eClass II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHost Interface\u003c\/td\u003e\n\u003ctd\u003eUSB type C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.5 x 4.5\" (21.59 x 11.43 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.6 lbs (624 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp class=\"hidden\"\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFluke Networks LIQ-KIT-IE\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLinkIQ Main Unit\u003c\/li\u003e\n\u003cli\u003eRemote ID #1-7\u003c\/li\u003e\n\u003cli\u003eIntelliTone(TM) Pro 200 Probe\u003c\/li\u003e\n\u003cli\u003eRJ45-RJ45 patch cord (M-F)\u003c\/li\u003e\n\u003cli\u003eQuick Reference Guide\u003c\/li\u003e\n\u003cli\u003eAC charger\u003c\/li\u003e\n\u003cli\u003eRJ45\/11 universal coupler\u003c\/li\u003e\n\u003cli\u003eRJ45\/M12X patch cord\u003c\/li\u003e\n\u003cli\u003eRJ45\/M12D patch cord\u003c\/li\u003e\n\u003cli\u003eRJ45\/M8D patch cord\u003c\/li\u003e\n\u003cli\u003eRJ45\/11 Modular Adapter\u003c\/li\u003e\n\u003cli\u003eHanging strap with Remote ID holder\u003c\/li\u003e\n\u003cli\u003eDuffle bag carry case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eFluke Networks LIQ-100-IE\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLinkIQ™ Main Unit\u003c\/li\u003e\n\u003cli\u003eRemote ID #1\u003c\/li\u003e\n\u003cli\u003eRJ45-RJ45 patch cord (M-F)\u003c\/li\u003e\n\u003cli\u003eQuick Reference Guide\u003c\/li\u003e\n\u003cli\u003eAC charger\u003c\/li\u003e\n\u003cli\u003eRJ45\/11 universal coupler\u003c\/li\u003e\n\u003cli\u003eRJ45\/M12X patch cord\u003c\/li\u003e\n\u003cli\u003eRJ45\/M12D patch cord\u003c\/li\u003e\n\u003cli\u003eRJ45\/M8D patch cord\u003c\/li\u003e\n\u003cli\u003eRJ45\/11 Modular Adapter\u003c\/li\u003e\n\u003cli\u003eHanging strap with Remote ID holder\u003c\/li\u003e\n\u003cli\u003eDuffle bag carry case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca title=\"Fluke Networks LIQ-KIT-IE Industrial Ethernet Cable and Network Tester Kit Spec Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/LinkIQ__Cable_Network_Tester-en-us.pdf?v=1630612671\" target=\"_blank\"\u003eFluke Networks LIQ-KIT-IE Industrial Ethernet Cable and Network Tester Kit Spec Sheet\u003c\/a\u003e\u003c\/p\u003e", "published_at":"2021-09-02T14:17:04", "created_at":"2021-09-02T14:17:02", "vendor":"Fluke Networks", "type":"Network Testing", "tags":[], "price":512311, "price_min":512311, "price_max":588199, "price_varies":true, "compare_at_price":null, "compare_at_price_min":0, "compare_at_price_max":0, "compare_at_price_varies":true, "all_variant_ids":[40563941900478,40563943538878], "variants":[{ "id":40563941900478, "product_id":6939387461822, "product_handle":"fluke-networks-liq-kit-ie-industrial-ethernet-cable-and-network-tester-kit", "title":"FLU-LIQ-KIT-IE", "option1":"FLU-LIQ-KIT-IE", "option2":null, "option3":null, "sku":"FLU-LIQ-KIT-IE", "requires_shipping":true, "taxable":true, "featured_image":{ "created_at":"T", "id":29726083973310, "position":1, "product_id":6939387461822, "src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/FlukeLIQ-KIT-IE.jpg?v=1630614390", "updated_at":"T", "width":500, "height":500},"image_id":29726083973310, "available":true, "name":"Fluke Networks LIQ-KIT-IE Industrial Ethernet Cable and Network Tester Kit - FLU-LIQ-KIT-IE", "options":["FLU-LIQ-KIT-IE"], "price":588199, "weight":907, "compare_at_price":null, "inventory_quantity":-2, "inventory_management":"shopify", "inventory_policy":"continue", "inventory_in_cart":0, "inventory_remaining":-2, "incoming":false, "next_incoming_date":null, "taxable":true, "barcode":"754082152194"},{ "id":40563943538878, "product_id":6939387461822, "product_handle":"fluke-networks-liq-kit-ie-industrial-ethernet-cable-and-network-tester-kit", "title":"FLU-LIQ-100-IE", "option1":"FLU-LIQ-100-IE", "option2":null, "option3":null, "sku":"FLU-LIQ-100-IE", "requires_shipping":true, "taxable":true, "featured_image":{ "created_at":"T", "id":29726112841918, "position":2, "product_id":6939387461822, "src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/FlukeLIQ-100-IE.jpg?v=1630614401", "updated_at":"T", "width":500, "height":500},"image_id":29726112841918, "available":true, "name":"Fluke Networks LIQ-KIT-IE Industrial Ethernet Cable and Network Tester Kit - FLU-LIQ-100-IE", "options":["FLU-LIQ-100-IE"], "price":512311, "weight":907, "compare_at_price":null, "inventory_quantity":0, "inventory_management":"shopify", "inventory_policy":"continue", "inventory_in_cart":0, "inventory_remaining":0, "incoming":false, "next_incoming_date":null, "taxable":true, "barcode":"754082152163"}], "available":true,"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/FlukeLIQ-KIT-IE.jpg?v=1630614390","\/\/kingswayinstruments.com\/cdn\/shop\/products\/FlukeLIQ-100-IE.jpg?v=1630614401"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/FlukeLIQ-KIT-IE.jpg?v=1630614390", "options":["Style"], "url":"\/products\/fluke-networks-liq-kit-ie-industrial-ethernet-cable-and-network-tester-kit"}