Canada’s Most Trusted Fluke Store

Fluke C550 Tool Bag
$201.58 CAD
Steel reinforced frame Rugged ballistic cloth with heavy duty hardware Large zippered storage compartment with 25 pockets Weather resistant Carry all your tools to the job One year warranty

Fluke H900 Test Lead Holder
$43.99 CAD
Heavy duty construction with mounting holes Holder has 10 slots for wires up to 8 mm in diameter Over-all dimensions: 27.9 cm L x 8.9 cm W x 3.2 cm H One year warranty

Fluke 80PJ-1 Type J Bead Probe
$65.80 CAD
Type-J thermocouple for general purpose applications Measurement range: -40 to 260°C One year warranty

Fluke 80CK-M type K Male Mini-Connectors
$65.80 CAD
Isothermal screw terminal for K wire Suitable for up to 20 gauge thermocouple wire Color coded to industry standards (K-yellow) Two per package One year warranty

Fluke TP175 TwistGuard Test Probes
$62.55 CAD
Adjustable tip length, allowing increased safety and precision Compatible with the TL22x series, TL238 and TL27 test leads Conforms to EN61010-031 CAT II 1000 V, CAT III 1000 V, CAT IV 600, 10 A rating, UL Listing One-year warranty

Fluke 80PK-25 SureGrip™ Piercing Temperature Probe
$250.58 CAD
Type-K thermocouple suitable for food industry, liquids and gels Measurement range : -40 to 260°C One year warranty

Fluke 8808A Digital Multimeter
$2,093.00 CAD
5.5 digit resolution Basic V DC accuracy of 0.015% Dual display Dedicated DC leakage current measurement 2 x 4 ohms 4-wire measurement technique Six dedicated buttons for fast access to instrument setups Hi/Lo limit compare for Pass/Fail testing Three-year warranty

Fluke TL1550EXT Extended Test Lead Set (25 ft.)
$720.79 CAD
3 test leads (red, black, green) connected to low-leakage probes 3 alligator clips (red, black, green) Test Leads extend to 25' 26mm maximum jaw opening Replacement test lead set for the fluke 1550B/1550C/1555 MegaohmMeter

Fluke 80PK-22 SureGrip™ Immersion Temperature Probe
$211.38 CAD
Fluke 80PK-22 SureGrip™ Immersion Temperature Probe is designed for use in liquid and gels. It can also be used as a general purpose temperature probe. The thermocouple junction is protected from tip to handle by an Inconel sheath. The 80PK-22 can be used with any temperature-measuring instrument that is designed to accept type K thermocouples a...

Fluke 80PK-26 SureGrip™ Tapered Temperature Probe
$250.58 CAD
Type-K thermocouple with tapered tip for use in air, non-caustic gas and surface applications, measurement range: -40 to 816ºC.

Fluke HC200 Hook Clips
$97.99 CAD
Set of four Hook Clips (two red and two gray). Compatible with VPS100, VPS101, VPS121 and all VPS200 series probes.

Fluke C50 Meter Case
$83.99 CAD
Zippered carrying case with inside pocket belt loop and inside meter strap.

Fluke i30 AC/DC Current Clamp
$960.40 CAD
The i30s current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

Fluke PM9082 Dual Banana Jack female to male BNC Adapter
$102.19 CAD
The set consists of two adapters. One red (signal) and one black (ground) 4-mm banana contact. Maximum Signal Voltage: 600V rms Maximum Voltage to Ground: 600V rms. CAT III per IEC 61010-031

Fluke 1577 Insulation Multimeter *** SEE FLUKE 1587FC***
$1,323.27 CAD
The Fluke 1577 Insulation Multimeter combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Fluke FUSE-440MA/1000VB5 5 Blister Pack
$51.80 CAD
440mA 1000V Fast Blow QTY 5

Fluke 80i-110s AC/DC Current Clamp
$1,581.99 CAD
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

Fluke 80BK-A Integrated DMM Temperature Probe
$103.59 CAD
Type-K thermocouple with standard shrouded banana jack Convenient one piece construction Compatible with DMMs with temperature measurement functions Measurement range: -40 to 260ºC Accuracy: +/- 2.2 °C or 2% whichever is greater ((0 to 260 °C) 1 m (39 in) lead One year warranty

Fluke 80PK-27 SureGrip™ Industrial Surface Temperature Probe
$652.39 CAD
The Fluke 80PK-27 SureGrip™ Industrial Surface Temperature Probe is designed to be compatible with any temperature measuring instrument that accepts Type K thermocouples, has a miniature thermocouple connector, and has cold reference junction compensation. The innovative SureGrip™ design makes it easier to hold the probe and focus on the measure...

Fluke 80PK-24 SureGrip™ Air Temperature Probe
$256.19 CAD
Type-K thermocouple for use in air and non-caustic gas measurements




















