AlphaLab GM1-ST Digital DC Gauss Meter - Static Magnetic Fields up to 20,000 Gauss
The DC Gaussmeter Model GM1-ST is measures strength and polarity of magnetic fields up to 19,999.9 gauss. The sensor can easily fit in a .060 inch (1.5 mm) gap and is at the end of a 100 cm flexible cable. The sensor end can be bent if required for a variety of situations. Place the sensor on a magnet face to measure the field. With a resolution of 0.1 gauss, it can measure any tiny variation from magnet to magnet or it can detect if a given magnet has lost even a little strength. Bend the sensor in to a “L” to measure inside a DC solenoid tube. The 5 ½ digit display requires neither auto nor manual range change, making it easier to use than older style 3 ½ or 4 ½ digit meters. Turn on the meter and immediately begin reading fields (updates 4 times per second). There is no setup required, making this the fastest, easiest gaussmeter available.
- Portable for easy measurements in factories or other industrial environments
- High dynamic range 5 ½ digit display reads even the strongest magnets with 0.1 gauss resolution, including polarity
- Turns on instantly, updates four times a second, no setup or initial calibration required
- Auto-Zero (subtracts the present field from subsequent readings); also a fine offset control
- Offset range is the full ±19,999.99 gauss
- 1% accuracy at room temperature, including probe
- Certificate of NIST traceability included (Dated from Manufacturer Build Date)
- Probe and Battery Included
- CE Compliant
- Detachable Rubber Boot Included
- Measures all permanent magnets. (Maximum field of magnets is about 15,000, which occurs only with rare-earth magnets in a gap configuration.)
- High resolution of 0.1 gauss over the entire range of +19,999.9 to -19,999.9 gauss allows detection of any variation in field from a magnet.
- Measures inside DC Solenoids (probe is bent into “L” shape to measure this).
- Sufficient resolution to map fields far from magnets.
|SPECIFICATIONS: 1-axis DC Gaussmeter GM1-ST|
|Resolution:||±19,999.9 G with polarity indicator|
|Accuracy:||±1% of reading (16° to 29°C); ±2% (-4° to 65°C)|
|Offset:||Auto-Zero. Also fine offset (0.1 gauss resolution)|
|Probe (non-detachable):||1.5 (thick) x 4.3 x 24 mm|
|Meter Size:||5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm|
|Battery:||9 volt alkaline (~ 40 hour life) / “Low Battery” indicator|
What's in the Box
- GM1-ST Digital Gauss Meter
- Manufacturer Calibration Certificate (Dated from Manufacturer Build Date)