DILLON EDjr-5T (EDjr-10K) EDJunior Dynamometer - 10,000 LB
The EDjunior dynamometer gets straight to the point – apply a load; take a reading. Its Spartan design is a direct response to industries that have wanted an extremely well-built instrument that could be relied upon for simple, yet critical measurements of weight and force.
The EDjr-5T model has a measuring capacity of 10,000 LB x 10 LB
The EDjunior provides peak detection as well as sustained load readings. Selectable units of measure include lbf, kgf and Newtons.
Accuracy — The load element design and strain gauges chosen for the EDjunior produce an accuracy of 0.2 % (full scale). This level of precision offers flexibility for use in a broad range of applications.
Resolution — Readings are displayed with a resolution of 1 part in 1000 to ensure the level of readability required for critical lifting applications. Control Interface The exclusive Dillon SOFTKEY interface provides direct access to setup and display functions without the typical confusing menu structure. The 6-digit dot-matrix display features 1 inch (26 mm) high numerals for greater visibility.
Power is supplied by two C-cell batteries that are easily accessible through a side-loading port. Battery replacement, however, is a rare event. With the EDjunior’s low power consumption, typical battery life is over 425 hours.
With its NEMA4/IP55 design, the EDjunior is at home in virtually any environment and ideally-suited to exterior job-site applications as well as in-plant use.
When in a low light area, turn on the configurable backlight to make readings highly visible.
10,000 lbf x 10
5,000 kgf x 5
50,000 N x 50
E4340 Alloy Steel - 500% Ultimate overload protection
Accuracy: 0.2% of capacity
Repeatability: 0.2% of capacity
Proof Load: 150% of capacity
What's in the Box
- Carry case, batteries, manual and calibration card