AEMC PEL 103 Power/Energy Data Logger Kit with LCD
Product Description
The PEL 103 is a low cost, simple to use, one, two (split phase) and three phase power/energy data logger. This product is ideal for electricians, engineers and contractors doing work in the area of building and system monitoring and upgrades, as well as residential and overall energy audits. All vital energy data is easily measured, recorded, and analyzed. Reports can be generated with confidence with minimal configuration time and effort (Standard and Customizable Reports supplied).
The instrument’s design enables it to be installed inside a load center panel (including the current sensors) allowing the door to close on most panels. The PEL 100 series offers all the essential functions for logging power/energy data from most electrical power networks in use today across the world (17 network set-ups provided). The PEL 100 series energy loggers measure and record three True RMS voltage inputs and current inputs, Watts, VARS, VA and Energy (kWh and kVA). Power Factor (PF), Displacement Power Factor (DPF), Crest Factor, Frequency and THD are calculated and recorded as well. Individual harmonic % information from 1 to the 50th harmonic are recorded at the operator’s choice. All variables are recorded and stored at a one second interval and on user selectable demand intervals from 1 to 60 minutes.
Overview
- Measurement of RMS voltages and currents at 128 times per cycle and stored every second
- Measurement of VA, W and var power values (total and per phase) stored every second
- Measurement of VAh, Wh and varh energy values (total and per phase) per second with source/load indication
- Calculation of the cos φ Displacement Power Factor (DPF) and the Power Factor (PF) stored every second
- Calculation of Total Harmonic Distortion (THD)
- Measurement, calculation and display of the harmonics up to the 50th order for 50/60 Hz and 7th order for 400Hz
- Measurement of the DC quantities (RMS calculation)
- Display Measurements
- Electrical network quantities are stored on a removable SD-Card
- Automatic recognition of the connected current sensors
- DataView software for configuration, data retrieval and real-time viewing of measurements with a PC
- Compact and rugged case
- Versatile communication interface choices built in (USB, Ethernet, Bluetooth)
Specifications
nputs | 3 Voltage / 3 Current: calculation of neutral current | ||||
Sample Rate | 128 per Cycle | 6.4kHz at 50Hz | 7.68kHz at 60Hz | ||
Specification | Range | Measurement Range | Resolution | Accuracy (Typical) | |
Volt | |||||
Vrms | 1000V P to N | 10 to 1000V | 0.1V | ±0.2% Rdg + 0.2V | |
Urms | 1000V P to P | 17 to 1700V | 0.1V | ±0.2% Rdg + 0.4V | |
Amps @ 50 and 60Hz | |||||
Amps (1V nominal) (excluding clamp accuracy |
Probe dependent | 0.2%< I < 120% Inom | Probe dependent | ±0.2% Rdg + 0.02% Inom | |
AmpFLEX & MiniFlex (including sensor accuracy) |
Range 100A Range 400A Range 2kA Range 10kA |
200mA to 120A 5 to 440A 50 to 2400A 400A to 12kA |
1mA 0.1A 0.1A & 1A 1A |
±1.2% Rdg + 50mA ±1.2% Rdg + 0.2A ±1.2% Rdg + 1A ±1.2% Rdg + 5A |
|
Frequency | 42.5 to 69Hz | 0.01Hz | ±0.1Hz | ||
Power | |||||
Watts (VA, var) P-Q-S | 10W to 10GW / 10var to 10Gvar / 10VA to 10GVA | 4 digits min | ±0.5% Rdg + 0.005% Pnom | ||
Power Factor (Cos Φ/DPF) | -1 to 1 | 0.001 | ±0.05 | ||
Energy | |||||
kWh (kVAh, kvarh) P-Q-S | Up to 4EWh / 4Evarh / 4 EVAh (E = 1018 ) | ±0.5% Rdg | |||
Harmonics | DC, 1 to 50 | ||||
Volts & Amp % | 0.01 to 655.0% | 0.01% | ±1% Rdg from 1 to 25 | ||
THD | 0.00 to 655.0% | 0.01% | ±1% Rdg | ||
General Features | |||||
Case | Design Rugged, shock proof with integrated protective holster, IP54 not included terminals. Shock and vibration IEC61010 | ||||
Interface | Isolated USB, Bluetooth, and Ethernet, SD card for direct transfer to PC. Dataview software for real time data, configuration and reporting included | ||||
Memory | 8GB SD card (SDHC compliant, FAT32 formatted) 32GB max | ||||
Display | LCD with backlight | ||||
Real-Time Clock | Time and date stamp for Trend mode | ||||
Power | AC 110V/230V 50/60Hz 15VA; Battery backup when power OFF, 60 minutes typical | ||||
Dimensions (L x W x H) | 10.08 x 4.92 x 1.46” (256 x 125 x 37mm) | ||||
Weight | 2.2lbs (1kg) | ||||
Altitude Operating | 2000m (6560ft) | ||||
Operating Temperature | 32 to 108.5°F; (0°C to +42.5°C) from 10 to 85% RH | ||||
Storage Temperature | -4 to 122°F; (-20°C to +50°C) from 0 to 75% RH with battery pack | ||||
Electro-Magnetic-Compatibility (EMC) | EN 61326-1 for emission and immunity | ||||
IP Rating | IP54 per IEC 60529 | ||||
Safety | IEC/EN 61010-1 (1000V CAT III-600V CAT IV), IEC 1326-1 |
What's in the Box
- Power & Energy Logger Model PEL 102
- 4 x Black Test Leads and Alligator Clips
- 12 x Color-coded ID Markers
- 3 x MA193-10-BK MiniFlex®
- Small Classic Tool Bag
- Multifix (mounting system)
- USB SD-Card Adapter
- Power Cord, 5 ft 115V
- 5 ft USB Cable
- 2 GB SD-Card
- 4 GB USB Stick with DataView® Software