Megger MIT400/2 Series Insulation Testers
Product Description
The MIT400-2 series insulation and continuity testers are designed not just for Electrical and Industrial, but with an exceptionally wide range of applications from electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics, maintenance, and more.
Overview
MIT400/2 250 V, 500 V and 1000 V
MIT410/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization Index, Dielectric Absorption Ratio
MIT420/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage
MIT430/2 50 V, 100 V, 250 V, 500 V and 1000 V + Polarization Index, Dielectric Absorption Ratio, Variable Test Voltage and Bluetooth download
A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application specific test voltages are required that do not appear in the standard ranges.
Continuity testing is now significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the “ohms” and “kOhms” ranges. Retained are the 200 mA and 20 mA test options.
Replacing the original MIT400 instruments the new units feature a redesigned case, back-stand, and 6 cell battery compartment with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating.
- Insulation testing up to 1000 V and 200 GΩ range
- Stabilised insulation test voltage (New)
- Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
- 600 V Trms AC and DC voltage measurement
- Live circuit detection and protection
- User variable insulation test voltage from 100V to 1000V (New) depending on model
- Test result storage and Bluetooth® downloading depending on model
- Rechargeable options for mains and car charging (New)depending on model
- CAT IV 600 V & IP54
Specifications
Insulation | MIT400/2 | MIT410/2 | MIT420/2 | MIT430/2 |
50 V / 100 V | ■ | ■ | ■ | |
250 V / 500 V / 1000 V | ■ | ■ | ■ | ■ |
Variable | ■ | ■ | ||
PI- / DAR / Timed |
■ | ■ | ■ | |
Lock button on MΩ |
■ | ■ | ■ | ■ |
Leakage current display | ■ | ■ | ■ | |
CONTINUITY | ||||
Continuity 0.01 Ω - 10 MΩ |
100 Ω | ■ | ■ | ■ |
Auto reverse polarity (setup ON-OFF) | ■ | ■ | ■ | |
Lead null (Less than <10 Ω) | ■ | ■ | ■ | ■ |
VOLTAGE | ||||
AC / DC Volts 600 V | ■ | ■ | ■ | ■ |
mV AC / DC range | ■ | ■ | ■ | ■ |
Frequency measurement 15 - 400 Hz | ■ | ■ | ■ | |
Input impedance |
0.25 mΩ |
0.25 mΩ | 0.25 mΩ | 0.25 mΩ |
CAPACITANCE | ||||
Capacitance 0.1 nF - 10 μF | ■ | ■ | ||
OTHER FEATURES | ||||
Combined continuity and volts |
■ | ■ | ||
PASS/FAIL on limit alarms | ■ | ■ | ■ | |
Auto power down (setup) | ■ | ■ | ■ | ■ |
On board memory | ■ | ■ | ||
Bluetooth® download + software | ■ | |||
AA Alkaline or NiMH |
Both |
Both |
Both |
Both |
Recharger ready | ■ | |||
CAT IV 600 V / CAT III 1000 V | ■ | ■ | ■ | ■ |
ACCESSORIES |
||||
Silicone leads (red/black) | ■ | ■ | ■ | ■ |
Switched probe supplied | ■ | ■ | ■ |
What's in the Box
- Insulation tester
- Red/Black Silicone test leads with Probes + Clips
- Owners information CD
- Batteries 6 x AA Alkaline
- Hard carry case