Products

{"id":4469138587721,"title":"AlphaLab GM1-HS Digital DC Gauss Meter - Static Magnetic Fields up to 800 Gauss","handle":"alphalab-digital-dc-gauss-meter-static-magnetic-fields-up-to-800-gauss","description":"\u003cp\u003e\u003cspan\u003eThe Model GM1-HS measures the strength and polarity of magnetic fields up to 799.99 gauss. The thin sensor is at the end of a 100 cm flexible cable. The sensor tip is also flexible and can be bent for a variety of situations. The sensor can be held against the surface of a steel part to check for residual magnetism, or it can be bent into an “L” shape to measure inside a DC Solenoid. This meter has a resolution of 0.01 gauss (1\/50 of the Earth’s typical field) which is finer resolution than the Model GM1-ST. It is also used to map fields from large magnets (If fields are over 800 gauss, use the Model GM1-ST). The meter has immediate turn-on and updates 4 times a second. There is no setup required, making this the fastest gaussmeter available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh dynamic range and sensitivity: reads up to 799.99 gauss with 0.01 gauss resolution including polarity\u003c\/li\u003e\n\u003cli\u003eInstant on, updates four times a second, with no setup or initial calibration required\u003c\/li\u003e\n\u003cli\u003eAuto-Zero (subtracts the present field from subsequent readings); also a fine offset control\u003c\/li\u003e\n\u003cli\u003eOffset range is the full ± 799.99 gauss\u003c\/li\u003e\n\u003cli\u003e1% accuracy at room temperature\u003c\/li\u003e\n\u003cli\u003eFlexible probe and battery are included\u003c\/li\u003e\n\u003cli\u003eCE Compliant\u003c\/li\u003e\n\u003cli\u003eCertificate of NIST traceability included\u003c\/li\u003e\n\u003cli\u003eDetachable Rubber Boot Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMakes detailed measurement of residual magnetism in metal parts.\u003c\/li\u003e\n\u003cli\u003eUse to map field near a magnet, such as the 5 gauss line around an MRI machine.\u003c\/li\u003e\n\u003cli\u003eDetect ambient field direction and strength, such as Earth Field\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"75%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\" width=\"100%\"\u003e\n\u003cp align=\"left\"\u003eSPECIFICATIONS: 1-axis DC Gaussmeter GM1-HS\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eRange\/Resolution:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e799.99 G\/0.01 G; with polarity indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eAccuracy:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e±1% of reading (16° to 29°C); ±2% (-4° to 65°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eOffset:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003eAuto Zero. Also fine offset (0.01 gauss resolution)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eProbe (non-detachable):\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e2.3 (thick) x 4.8 x 24 mm on 100 cm cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eSize:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eWeight:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e8 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eBattery:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e9 volt alkaline (~ 20 hour life)\/ “Low Battery” indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGM1-HS Digital Gauss Meter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufacturer Calibration Certificate (Dated)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-20T15:59:48-06:00","created_at":"2020-05-20T16:03:45-06:00","vendor":"Alpha Lab","type":"Gauss Meters","tags":[],"price":74900,"price_min":74900,"price_max":74900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31540205781065,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"GM1-HS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AlphaLab GM1-HS Digital DC Gauss Meter - Static Magnetic Fields up to 800 Gauss","public_title":null,"options":["Default Title"],"price":74900,"weight":2268,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/AlphalabGM1-HSGaussMeter.jpg?v=1590012226"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/AlphalabGM1-HSGaussMeter.jpg?v=1590012226","options":["Title"],"media":[{"alt":null,"id":6183243972681,"position":1,"preview_image":{"aspect_ratio":1.0,"height":250,"width":250,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/AlphalabGM1-HSGaussMeter.jpg?v=1590012226"},"aspect_ratio":1.0,"height":250,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/AlphalabGM1-HSGaussMeter.jpg?v=1590012226","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cspan\u003eThe Model GM1-HS measures the strength and polarity of magnetic fields up to 799.99 gauss. The thin sensor is at the end of a 100 cm flexible cable. The sensor tip is also flexible and can be bent for a variety of situations. The sensor can be held against the surface of a steel part to check for residual magnetism, or it can be bent into an “L” shape to measure inside a DC Solenoid. This meter has a resolution of 0.01 gauss (1\/50 of the Earth’s typical field) which is finer resolution than the Model GM1-ST. It is also used to map fields from large magnets (If fields are over 800 gauss, use the Model GM1-ST). The meter has immediate turn-on and updates 4 times a second. There is no setup required, making this the fastest gaussmeter available.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh dynamic range and sensitivity: reads up to 799.99 gauss with 0.01 gauss resolution including polarity\u003c\/li\u003e\n\u003cli\u003eInstant on, updates four times a second, with no setup or initial calibration required\u003c\/li\u003e\n\u003cli\u003eAuto-Zero (subtracts the present field from subsequent readings); also a fine offset control\u003c\/li\u003e\n\u003cli\u003eOffset range is the full ± 799.99 gauss\u003c\/li\u003e\n\u003cli\u003e1% accuracy at room temperature\u003c\/li\u003e\n\u003cli\u003eFlexible probe and battery are included\u003c\/li\u003e\n\u003cli\u003eCE Compliant\u003c\/li\u003e\n\u003cli\u003eCertificate of NIST traceability included\u003c\/li\u003e\n\u003cli\u003eDetachable Rubber Boot Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMakes detailed measurement of residual magnetism in metal parts.\u003c\/li\u003e\n\u003cli\u003eUse to map field near a magnet, such as the 5 gauss line around an MRI machine.\u003c\/li\u003e\n\u003cli\u003eDetect ambient field direction and strength, such as Earth Field\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"75%\" cellspacing=\"0\" cellpadding=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth colspan=\"2\" width=\"100%\"\u003e\n\u003cp align=\"left\"\u003eSPECIFICATIONS: 1-axis DC Gaussmeter GM1-HS\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eRange\/Resolution:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e799.99 G\/0.01 G; with polarity indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eAccuracy:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e±1% of reading (16° to 29°C); ±2% (-4° to 65°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eOffset:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003eAuto Zero. Also fine offset (0.01 gauss resolution)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eProbe (non-detachable):\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e2.3 (thick) x 4.8 x 24 mm on 100 cm cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eSize:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e5.2 x 3.6 x 1.6 inches; 132 x 91 x 41 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eWeight:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e8 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003eBattery:\u003c\/td\u003e\n\u003ctd width=\"50%\"\u003e9 volt alkaline (~ 20 hour life)\/ “Low Battery” indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGM1-HS Digital Gauss Meter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufacturer Calibration Certificate (Dated)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461560791113,"title":"Hubner Pulse Converters | HTL ↔ TTL","handle":"hubner-pulse-converters-htl-↔-ttl","description":"\u003ch4\u003eThe pulse transformers\u003c\/h4\u003e\n\u003cp\u003ePulse converters are utilized for purposes of electrical isolation, signal level conversion and elimination of interference signals; they also convert HTL to TTL as well as TTL to HTL. The output stages are equipped with the latest driver ICs, and enable signal transmissions along long lengths of cables in conjunction with high output frequencies. Optocouplers isolate the inputs from the outputs. Short-circuits and output stage overload are signalled. The modules can be snapped onto standard mounting rails EN 50 022.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConverts HTL in TTL or TTL in HTL\u003c\/li\u003e\n\u003cli\u003eSignal level conversion, eliminate interference signals\u003c\/li\u003e\n\u003cli\u003eInput and output electrically isolated by means of optocouplers\u003c\/li\u003e\n\u003cli\u003eOptions: Supply voltage 5 V or 12-30 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct usage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eEncoder signal outputs, convert (HTL in TTL or TTL in HTL)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal input\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL (square wave 12-30 V) or TTL (square wave 2.8-6 V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL (0°, 90°, N and respective inverted signals)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0 - 250 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eElectronic housing for standard mounting rail\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e50 x 75 x 52 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-20 °C to +70 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e18 pole PHOENIX COMBICON screw terminals 2.5 mm²\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIsolated conversion of HTL in TTL or vice versa with different supply voltages\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOM 3-1-1: HTL\/HTL: 12 - 30 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-2: TTL\/HTL: 12 - 30 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-3: HTL\/TTL: 5 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-4: TTL\/TTL: 5 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-5: HTL\/TTL: 12 - 30 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-6: TTL\/TTL: 12 - 30 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T14:08:20-06:00","created_at":"2020-05-14T14:08:20-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512220532809,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner Pulse Converters | HTL ↔ TTL","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerPulseConverter.jpg?v=1589487004"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerPulseConverter.jpg?v=1589487004","options":["Title"],"media":[{"alt":null,"id":6145493565513,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerPulseConverter.jpg?v=1589487004"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerPulseConverter.jpg?v=1589487004","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe pulse transformers\u003c\/h4\u003e\n\u003cp\u003ePulse converters are utilized for purposes of electrical isolation, signal level conversion and elimination of interference signals; they also convert HTL to TTL as well as TTL to HTL. The output stages are equipped with the latest driver ICs, and enable signal transmissions along long lengths of cables in conjunction with high output frequencies. Optocouplers isolate the inputs from the outputs. Short-circuits and output stage overload are signalled. The modules can be snapped onto standard mounting rails EN 50 022.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConverts HTL in TTL or TTL in HTL\u003c\/li\u003e\n\u003cli\u003eSignal level conversion, eliminate interference signals\u003c\/li\u003e\n\u003cli\u003eInput and output electrically isolated by means of optocouplers\u003c\/li\u003e\n\u003cli\u003eOptions: Supply voltage 5 V or 12-30 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct usage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eEncoder signal outputs, convert (HTL in TTL or TTL in HTL)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal input\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL (square wave 12-30 V) or TTL (square wave 2.8-6 V)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL (0°, 90°, N and respective inverted signals)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0 - 250 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eElectronic housing for standard mounting rail\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e50 x 75 x 52 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-20 °C to +70 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e18 pole PHOENIX COMBICON screw terminals 2.5 mm²\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIsolated conversion of HTL in TTL or vice versa with different supply voltages\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOM 3-1-1: HTL\/HTL: 12 - 30 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-2: TTL\/HTL: 12 - 30 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-3: HTL\/TTL: 5 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-4: TTL\/TTL: 5 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-5: HTL\/TTL: 12 - 30 V\u003c\/li\u003e\n\u003cli\u003eOM 3-1-6: TTL\/TTL: 12 - 30 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461554925641,"title":"Hubner FOC signal transmission for HTL\/TTL (up to 100 kHz)","handle":"hubner-foc-signal-transmission-for-htl-ttl-up-to-100-khz","description":"\u003ch4\u003eThe converters\u003c\/h4\u003e\n\u003cp\u003eFOC transmitters and FOC decoders are always installed when electric incremental signals are to be transmitted disturbance-free via fiber optic cables. They encode and transmit signals via a fiber optic cable to the decoder in the switchboard, where they can be used by the controller or other modules in the switchboard. In doing so they ensure high data transmission rates even over long cable lengths. Electrical isolation guarantees high levels of transmission reliability. It is possible to select HTL and\/or TTL as input blocks. Optional FOC cable break monitoring is available to increase system reliability. Many Hübner Giessen encoder solutions are optionally also available with an integrated FOC transmitter.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModule set (transmitter + decoder) for incremental signals (HTL or TTL)\u003c\/li\u003e\n\u003cli\u003eAlternative: Combination of decoder module and encoder with integrated transmitter\u003c\/li\u003e\n\u003cli\u003eDisturbance-free signal transmission up to 1000 m range; signal conversion time 2 µs\u003c\/li\u003e\n\u003cli\u003eOptions: FOC break monitoring, galvanically isolated output blocks, aluminium die-cast housing for outdoor applications (IP66)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct usage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eImplement FOC transmission path (Incremental)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal input\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter LWLS-T (switchboard) uad LWL-T (housing for outdoor applications)\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSignal input (from encoder): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncremental: 0°, 90°, N, STATUS; each with inverted signals\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal transmission (outputs transmitter module):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptical (to decoder): Fiber optic 62.5\/125 µm or 50\/125 µm with ST plug-in connector\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal level:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL (RS 422A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDecoder LWLS-D and LWLS-Di (galvanically isolated output blocks)\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSignal output (to controller): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncremental: 0°, 90°, N, STATUS; each with inverted signals\u003c\/li\u003e\n\u003cli\u003e2 output blocks, optional additional galvanic isolation between the two output blocks (type LWLS-Di)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal transmission (inputs decoder module):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptical (from transmitter): Fiber optic 62.5\/125 µm or 50\/125 µm with ST plug-in connector. All data via only one optical fibre.\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal level:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL (2 output blocks, for each output block: HTL or TTL level)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0 - 100 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: Electronic housing for standard mounting rails\u003c\/li\u003e\n\u003cli\u003eLWL-T: Die cast metal aluminium housing for outdoor applications\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): Electronic housing for standard mounting rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: 23 x 120 x 115 mm\u003c\/li\u003e\n\u003cli\u003eLWL-T:  125 x 80 x 57 mm\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): 23 x 120 x 115 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: -20 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003eLWL-T:  -25 °C to +85 °C\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): -20 °C to +70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: IP20 (switchboard)\u003c\/li\u003e\n\u003cli\u003eLWL-T: IP66 (outdoor area)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): IP20 (switchboard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: Connection terminals and FOC connector outside\u003c\/li\u003e\n\u003cli\u003eLWL-T: Terminal box (terminal strip and FOC connector inside)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): Connection terminals and FOC connector outside\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eConstant cycle time \u0026lt; 2 µs (transmitter input to decoder output)\u003c\/li\u003e\n\u003cli\u003eDistances up to 1000 m\u003c\/li\u003e\n\u003cli\u003eOptional cable break and status monitoring\u003c\/li\u003e\n\u003cli\u003e2 output blocks, optional additional galvanic isolation between the two output blocks (type LWLS-Di)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminium die-cast housing for outdoor applications (Transmitter)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eNew transmission technology - patent pending\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T14:04:57-06:00","created_at":"2020-05-14T14:04:57-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512197595209,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FOC signal transmission for HTL\/TTL (up to 100 kHz)","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter1.jpg?v=1589486853","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter2.jpg?v=1589486853"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter1.jpg?v=1589486853","options":["Title"],"media":[{"alt":null,"id":6145472102473,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter1.jpg?v=1589486853"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter1.jpg?v=1589486853","width":1366},{"alt":null,"id":6145472135241,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter2.jpg?v=1589486853"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFOCTransmitter2.jpg?v=1589486853","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe converters\u003c\/h4\u003e\n\u003cp\u003eFOC transmitters and FOC decoders are always installed when electric incremental signals are to be transmitted disturbance-free via fiber optic cables. They encode and transmit signals via a fiber optic cable to the decoder in the switchboard, where they can be used by the controller or other modules in the switchboard. In doing so they ensure high data transmission rates even over long cable lengths. Electrical isolation guarantees high levels of transmission reliability. It is possible to select HTL and\/or TTL as input blocks. Optional FOC cable break monitoring is available to increase system reliability. Many Hübner Giessen encoder solutions are optionally also available with an integrated FOC transmitter.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModule set (transmitter + decoder) for incremental signals (HTL or TTL)\u003c\/li\u003e\n\u003cli\u003eAlternative: Combination of decoder module and encoder with integrated transmitter\u003c\/li\u003e\n\u003cli\u003eDisturbance-free signal transmission up to 1000 m range; signal conversion time 2 µs\u003c\/li\u003e\n\u003cli\u003eOptions: FOC break monitoring, galvanically isolated output blocks, aluminium die-cast housing for outdoor applications (IP66)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct usage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eImplement FOC transmission path (Incremental)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal input\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter LWLS-T (switchboard) uad LWL-T (housing for outdoor applications)\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSignal input (from encoder): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncremental: 0°, 90°, N, STATUS; each with inverted signals\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal transmission (outputs transmitter module):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptical (to decoder): Fiber optic 62.5\/125 µm or 50\/125 µm with ST plug-in connector\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal level:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL (RS 422A)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDecoder LWLS-D and LWLS-Di (galvanically isolated output blocks)\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003eSignal output (to controller): \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncremental: 0°, 90°, N, STATUS; each with inverted signals\u003c\/li\u003e\n\u003cli\u003e2 output blocks, optional additional galvanic isolation between the two output blocks (type LWLS-Di)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal transmission (inputs decoder module):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptical (from transmitter): Fiber optic 62.5\/125 µm or 50\/125 µm with ST plug-in connector. All data via only one optical fibre.\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSignal level:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL (2 output blocks, for each output block: HTL or TTL level)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0 - 100 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCasing\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: Electronic housing for standard mounting rails\u003c\/li\u003e\n\u003cli\u003eLWL-T: Die cast metal aluminium housing for outdoor applications\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): Electronic housing for standard mounting rails\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: 23 x 120 x 115 mm\u003c\/li\u003e\n\u003cli\u003eLWL-T:  125 x 80 x 57 mm\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): 23 x 120 x 115 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: -20 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003eLWL-T:  -25 °C to +85 °C\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): -20 °C to +70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: IP20 (switchboard)\u003c\/li\u003e\n\u003cli\u003eLWL-T: IP66 (outdoor area)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): IP20 (switchboard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTransmitter\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-T: Connection terminals and FOC connector outside\u003c\/li\u003e\n\u003cli\u003eLWL-T: Terminal box (terminal strip and FOC connector inside)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDecoder\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLWLS-D(i): Connection terminals and FOC connector outside\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eConstant cycle time \u0026lt; 2 µs (transmitter input to decoder output)\u003c\/li\u003e\n\u003cli\u003eDistances up to 1000 m\u003c\/li\u003e\n\u003cli\u003eOptional cable break and status monitoring\u003c\/li\u003e\n\u003cli\u003e2 output blocks, optional additional galvanic isolation between the two output blocks (type LWLS-Di)\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAluminium die-cast housing for outdoor applications (Transmitter)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eNew transmission technology - patent pending\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461549781065,"title":"Hubner EGS 2 \/ EGSHJ 2 Overspeed Switches","handle":"hubner-egs-2-egshj-2-overspeed-switches","description":"\u003ch4\u003eThe preset speed monitors\u003c\/h4\u003e\n\u003cp\u003eThe electronic speed switches monitor the factory-set speed with high switching accuracy, including low operating speeds. Alternatively, they can be used as standstill monitors. As a consequence, the speed switches play their part in system and personnel protection. They are installed on motors, for example in cranes, in mining operations as well as in rolling mills and more.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMonitor overspeed and standstill\u003c\/li\u003e\n\u003cli\u003eHollow shafts (isolated ball bearings) up to Ø 17 mm, solid shaft Ø 11 mm (flange mounting)\u003c\/li\u003e\n\u003cli\u003eNonwearing semi-conductor switch (NO contact): one switching output set ex works\u003c\/li\u003e\n\u003cli\u003eSwitching capacity up to 30 VDC and 0.5 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of switches\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching speed range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1-6300 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003e1-5400 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching function\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed monitoring: Opens when switching speed exceeded\u003c\/li\u003e\n\u003cli\u003eStandstill monitoring: Opens when angle of rotation is altered\u003c\/li\u003e\n\u003cli\u003eSwitching points set ex-works\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 7000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003eUp to 6000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable (0.6-3 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5) \/ Ø 11 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft (isolated bearings) \/ Ø 12 mm, Ø 16 mm with clamp, Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to + 85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 2 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIncremental output: See FG 2 with option S\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft devices: Torque bracket (on request)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_egs2-40-41_OVerspeed_Switch_Catalogue.pdf?v=1589488089\" target=\"_blank\" title=\"Hubner EGS2 Overspeed Switch Catalogue\" rel=\"noopener noreferrer\"\u003eHubner EGS2 Overspeed Switch Catalogue\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T14:01:38-06:00","created_at":"2020-05-14T14:01:38-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512182489161,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner EGS 2 \/ EGSHJ 2 Overspeed Switches","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder1.jpg?v=1589487534","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder2.jpg?v=1589487534","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder3.jpg?v=1589487534"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder1.jpg?v=1589487534","options":["Title"],"media":[{"alt":null,"id":6145564344393,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder1.jpg?v=1589487534"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder1.jpg?v=1589487534","width":1366},{"alt":null,"id":6145564377161,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder2.jpg?v=1589487534"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder2.jpg?v=1589487534","width":1366},{"alt":null,"id":6145564409929,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder3.jpg?v=1589487534"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS2-EGSHJ2OverspeedEncoder3.jpg?v=1589487534","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe preset speed monitors\u003c\/h4\u003e\n\u003cp\u003eThe electronic speed switches monitor the factory-set speed with high switching accuracy, including low operating speeds. Alternatively, they can be used as standstill monitors. As a consequence, the speed switches play their part in system and personnel protection. They are installed on motors, for example in cranes, in mining operations as well as in rolling mills and more.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMonitor overspeed and standstill\u003c\/li\u003e\n\u003cli\u003eHollow shafts (isolated ball bearings) up to Ø 17 mm, solid shaft Ø 11 mm (flange mounting)\u003c\/li\u003e\n\u003cli\u003eNonwearing semi-conductor switch (NO contact): one switching output set ex works\u003c\/li\u003e\n\u003cli\u003eSwitching capacity up to 30 VDC and 0.5 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of switches\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching speed range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e1-6300 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003e1-5400 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching function\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed monitoring: Opens when switching speed exceeded\u003c\/li\u003e\n\u003cli\u003eStandstill monitoring: Opens when angle of rotation is altered\u003c\/li\u003e\n\u003cli\u003eSwitching points set ex-works\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 7000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003eUp to 6000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable (0.6-3 m)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5) \/ Ø 11 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft (isolated bearings) \/ Ø 12 mm, Ø 16 mm with clamp, Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to + 85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 2 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIncremental output: See FG 2 with option S\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft devices: Torque bracket (on request)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_egs2-40-41_OVerspeed_Switch_Catalogue.pdf?v=1589488089\" target=\"_blank\" title=\"Hubner EGS2 Overspeed Switch Catalogue\" rel=\"noopener noreferrer\"\u003eHubner EGS2 Overspeed Switch Catalogue\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461545553993,"title":"Hubner EGS 41 SIL 2 \/ EGSH(J) 41 SIL 2 Overspeed Switches","handle":"hubner-egs-41-sil-2-egshj-41-sil-2-overspeed-switches","description":"\u003ch4\u003eThe programmable speed monitors with integrated safety\u003c\/h4\u003e\n\u003cp\u003eThe electronic overspeed switches monitor as many as four programmable speed ranges (overspeeds, underspeeds and standstill) with a high level of switching accuracy, including at low operating speeds. They are certified for safety applications up to SIL 2 \/ PL d. If a programmed speed is exceeded or is too low, the respective switching output switches. As a consequence, the speed switches play their part in system and personnel protection. They are installed on motors on cranes, in mining operations as well as in rolling mills and more. When devices are swapped it is possible to transfer the parameters previously stored on the first device to the new device.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSafety integrated speed monitoring (programmable)\u003c\/li\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eNonwearing semi-conductor switch (NO contact): Up to 4 programmable \/ up to 2 diagnostics\u003c\/li\u003e\n\u003cli\u003eOptions: Isolated ball bearings (hollow shaft), additional incremental output, further encoders attachable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC or 100-240 VAC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of switches\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2 or 4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0-30 VDC or 30-230 VAC\/DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching speed range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-5400 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003e0.5-3600 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching function\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed monitoring: Opens when switching speed exceeded or fallen below\u003c\/li\u003e\n\u003cli\u003eAdditional functions: Direction of rotation switch, switching hysteresis (min. 10%), switching delay (0-300 ms), …\u003c\/li\u003e\n\u003cli\u003eProgramming via the selected switching speed range (interface: Mini USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 6000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003eUp to 4000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eWith additional integrated FG 40\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSIL 2 (IEC 61508) \/ PL d (DIN EN ISO 13849)\u003c\/li\u003e\n\u003cli\u003eUL\/CSA (for all devices with connection technology „Terminal strip in a terminal box“ and up to 30 V supply voltage \/ switching voltage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40_Overspeed_Switch_Manual_-_2020.pdf?v=1589488147\" target=\"_blank\" title=\"Hubner EGS41 Overspeed Switch Manual\" rel=\"noopener noreferrer\"\u003eHubner EGS41 Overspeed Switch Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40-EGSHJ_40_Overspeed_Switch_Catalogue_-_2020.pdf?v=1589488154\" target=\"_blank\" title=\"Hubner EGS41 Overspeed Switch Catalogue\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eHubner EGS41 Overspeed Switch Catalogue\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:58:52-06:00","created_at":"2020-05-14T13:58:52-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512168267849,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner EGS 41 SIL 2 \/ EGSH(J) 41 SIL 2 Overspeed Switches","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1_e7981fe1-75cd-4aa0-9035-e926671b2fbb.jpg?v=1589486408","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder2_a0ac62b2-f5dd-4047-90c6-96bd7f4c875d.jpg?v=1589486408","\/\/kingswayinstruments.com\/cdn\/shop\/products\/Hubneregs41-2.jpg?v=1589486415"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1_e7981fe1-75cd-4aa0-9035-e926671b2fbb.jpg?v=1589486408","options":["Title"],"media":[{"alt":null,"id":6145428881481,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1_e7981fe1-75cd-4aa0-9035-e926671b2fbb.jpg?v=1589486408"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1_e7981fe1-75cd-4aa0-9035-e926671b2fbb.jpg?v=1589486408","width":1366},{"alt":null,"id":6145428947017,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder2_a0ac62b2-f5dd-4047-90c6-96bd7f4c875d.jpg?v=1589486408"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder2_a0ac62b2-f5dd-4047-90c6-96bd7f4c875d.jpg?v=1589486408","width":1366},{"alt":null,"id":6145429569609,"position":3,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Hubneregs41-2.jpg?v=1589486415"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Hubneregs41-2.jpg?v=1589486415","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe programmable speed monitors with integrated safety\u003c\/h4\u003e\n\u003cp\u003eThe electronic overspeed switches monitor as many as four programmable speed ranges (overspeeds, underspeeds and standstill) with a high level of switching accuracy, including at low operating speeds. They are certified for safety applications up to SIL 2 \/ PL d. If a programmed speed is exceeded or is too low, the respective switching output switches. As a consequence, the speed switches play their part in system and personnel protection. They are installed on motors on cranes, in mining operations as well as in rolling mills and more. When devices are swapped it is possible to transfer the parameters previously stored on the first device to the new device.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSafety integrated speed monitoring (programmable)\u003c\/li\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eNonwearing semi-conductor switch (NO contact): Up to 4 programmable \/ up to 2 diagnostics\u003c\/li\u003e\n\u003cli\u003eOptions: Isolated ball bearings (hollow shaft), additional incremental output, further encoders attachable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC or 100-240 VAC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of switches\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2 or 4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0-30 VDC or 30-230 VAC\/DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching speed range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0.5-5400 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003e0.5-3600 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching function\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed monitoring: Opens when switching speed exceeded or fallen below\u003c\/li\u003e\n\u003cli\u003eAdditional functions: Direction of rotation switch, switching hysteresis (min. 10%), switching delay (0-300 ms), …\u003c\/li\u003e\n\u003cli\u003eProgramming via the selected switching speed range (interface: Mini USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 6000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003eUp to 4000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eWith additional integrated FG 40\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSIL 2 (IEC 61508) \/ PL d (DIN EN ISO 13849)\u003c\/li\u003e\n\u003cli\u003eUL\/CSA (for all devices with connection technology „Terminal strip in a terminal box“ and up to 30 V supply voltage \/ switching voltage)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40_Overspeed_Switch_Manual_-_2020.pdf?v=1589488147\" target=\"_blank\" title=\"Hubner EGS41 Overspeed Switch Manual\" rel=\"noopener noreferrer\"\u003eHubner EGS41 Overspeed Switch Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40-EGSHJ_40_Overspeed_Switch_Catalogue_-_2020.pdf?v=1589488154\" target=\"_blank\" title=\"Hubner EGS41 Overspeed Switch Catalogue\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eHubner EGS41 Overspeed Switch Catalogue\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461537558601,"title":"Hubner EGS 40 \/ EGSH(J) 40 Overspeed Switches","handle":"hubner-egs-40-egshj-40-overspeed-switches","description":"\u003ch4\u003eThe programmable speed monitors\u003c\/h4\u003e\n\u003cp\u003eThe electronic overspeed switches monitor as many as four programmable speed ranges (overspeeds, underspeeds and standstill) with a high level of switching accuracy, including at low operating speeds. If a programmed speed is exceeded or is too low, the respective switching output switches. As a consequence, the speed switches play their part in system and personnel protection. They are installed on motors on cranes, in mining operations as well as in rolling mills and more. When devices are swapped it is possible to transfer the parameters previously stored on the first device to the new device.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMonitor overspeeds and underspeeds (programmable)\u003c\/li\u003e\n\u003cli\u003eHollow shafts up to Ø 25 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eRelay contact \/ switching output: Up to 4 programmable \/ up to 2 diagnostics\u003c\/li\u003e\n\u003cli\u003eOptions: Isolated ball bearings (hollow shaft), additional incremental output, further encoders attachable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC or 100-240 VAC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of switches\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2 or 4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2-30 VDC or 30-230 VAC\/DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching speed range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0.63-6000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003e0.63-4000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching function\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed monitoring: Opens when switching speed exceeded or fallen below\u003c\/li\u003e\n\u003cli\u003eAdditional functions: Direction of rotation switch, switching hysteresis (min. 10%), switching delay (0-300 ms), …\u003c\/li\u003e\n\u003cli\u003eProgramming via the selected switching speed range (interface: Mini USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 6000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003eUp to 4000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable (0.6-3 m)\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35): Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway; Ø 16 mm, Ø 25 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIncremental output: See FG 40 with option S\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA (for all devices with connection technology „Terminal strip in a terminal box“ and up to 30 V supply voltage \/ switching voltage)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40_Overspeed_Switch_Manual_-_2020.pdf?v=1589488147\" target=\"_blank\" title=\"Hubner EGS40 Overspeed Switch Manual\" rel=\"noopener noreferrer\"\u003eHubner EGS40 Overspeed Switch Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40-EGSHJ_40_Overspeed_Switch_Catalogue_-_2020.pdf?v=1589488154\" target=\"_blank\" title=\"Hubner EGS40 Overspeed Switch Catalogue\" rel=\"noopener noreferrer\"\u003eHubner EGS40 Overspeed Switch Catalogue\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:54:12-06:00","created_at":"2020-05-14T13:54:12-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512142741577,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner EGS 40 \/ EGSH(J) 40 Overspeed Switches","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1.jpg?v=1589486276","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder2.jpg?v=1589486276"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1.jpg?v=1589486276","options":["Title"],"media":[{"alt":null,"id":6145417773129,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1.jpg?v=1589486276"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder1.jpg?v=1589486276","width":1366},{"alt":null,"id":6145417805897,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder2.jpg?v=1589486276"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerEGS40-EGSHJ40Encoder2.jpg?v=1589486276","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe programmable speed monitors\u003c\/h4\u003e\n\u003cp\u003eThe electronic overspeed switches monitor as many as four programmable speed ranges (overspeeds, underspeeds and standstill) with a high level of switching accuracy, including at low operating speeds. If a programmed speed is exceeded or is too low, the respective switching output switches. As a consequence, the speed switches play their part in system and personnel protection. They are installed on motors on cranes, in mining operations as well as in rolling mills and more. When devices are swapped it is possible to transfer the parameters previously stored on the first device to the new device.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMonitor overspeeds and underspeeds (programmable)\u003c\/li\u003e\n\u003cli\u003eHollow shafts up to Ø 25 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eRelay contact \/ switching output: Up to 4 programmable \/ up to 2 diagnostics\u003c\/li\u003e\n\u003cli\u003eOptions: Isolated ball bearings (hollow shaft), additional incremental output, further encoders attachable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC or 100-240 VAC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of switches\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2 or 4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2-30 VDC or 30-230 VAC\/DC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching speed range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0.63-6000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003e0.63-4000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching function\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed monitoring: Opens when switching speed exceeded or fallen below\u003c\/li\u003e\n\u003cli\u003eAdditional functions: Direction of rotation switch, switching hysteresis (min. 10%), switching delay (0-300 ms), …\u003c\/li\u003e\n\u003cli\u003eProgramming via the selected switching speed range (interface: Mini USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 6000 rpm with solid shaft\u003c\/li\u003e\n\u003cli\u003eUp to 4000 rpm with hollow shaft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable (0.6-3 m)\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35): Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway; Ø 16 mm, Ø 25 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIncremental output: See FG 40 with option S\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA (for all devices with connection technology „Terminal strip in a terminal box“ and up to 30 V supply voltage \/ switching voltage)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40_Overspeed_Switch_Manual_-_2020.pdf?v=1589488147\" target=\"_blank\" title=\"Hubner EGS40 Overspeed Switch Manual\" rel=\"noopener noreferrer\"\u003eHubner EGS40 Overspeed Switch Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_EGS40-EGSHJ_40_Overspeed_Switch_Catalogue_-_2020.pdf?v=1589488154\" target=\"_blank\" title=\"Hubner EGS40 Overspeed Switch Catalogue\" rel=\"noopener noreferrer\"\u003eHubner EGS40 Overspeed Switch Catalogue\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e"}

{"id":4461529825353,"title":"Hubner AS40 \/ ASH40 (Singleturn) Absolute Encoders","handle":"hubner-as40-ash40-singleturn-absolute-encoders","description":"\u003ch4\u003eThe versatile position detectors\u003c\/h4\u003e\n\u003cp\u003eThe rugged singleturn encoders AS...40 and AS...H 40 can be deployed in a wide variety of applications to detect positions in steel and rolling mills, in mining operations as well as in ports and crane systems. They supply precise information about the position of the shaft; they are installed for position measuring as well as positioning tasks. Thanks in particular to the extremely rugged foot construction it is possible to easily attach additional encoders to the second shaft end.c\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eASE 40 \/ ASEH 40, ASS 40 \/ ASSH 40, ASSI 40 \/ ASSIH 40, ASPA 40 \/ ASPAH 40\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eHeavy-duty design, other encoder can be attached\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eHigh signal quality, up to 16 bit singleturn, variety of interfaces\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eOptions: Second interface, additional incremental outputs\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSingleturn max. 16 bit (65536 steps per rotation)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of interfaces\u003c\/td\u003e\n\u003ctd\u003e1 or 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\/Product Name\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEtherCAT  |  ASE 40 \/ ASEH 40\u003c\/li\u003e\n\u003cli\u003eSSI  |  ASS 40 \/ ASSH 40\u003c\/li\u003e\n\u003cli\u003eSSI-Inkremental  |  ASSI 40 \/ ASSIH 40\u003c\/li\u003e\n\u003cli\u003eParallel  |  ASPA 40 \/ ASPAH 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 6000 rpm\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 4000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003cli\u003eFieldbus box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 20 mm with keyway; Ø 16 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 4.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional single incremental output\u003c\/li\u003e\n\u003cli\u003eAdditional double incremental output with reference pulse in second terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_ams40-ass40_Manual_-_2020.pdf?v=1589487767\" target=\"_blank\" title=\"Hubner AS Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner AS Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_as-am-al-40-41-60_Absolute_Encoder_Catalogue_-_2020.pdf?v=1589487942\" target=\"_blank\" title=\"Hubner AS Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner AS Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:50:03-06:00","created_at":"2020-05-14T13:50:03-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512120885321,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner AS40 \/ ASH40 (Singleturn) Absolute Encoders","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder1.jpg?v=1589486022","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder2.jpg?v=1589486022","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder3.jpg?v=1589486022","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder4.jpg?v=1589486022"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder1.jpg?v=1589486022","options":["Title"],"media":[{"alt":null,"id":6145394147401,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder1.jpg?v=1589486022"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder1.jpg?v=1589486022","width":1366},{"alt":null,"id":6145394180169,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder2.jpg?v=1589486022"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder2.jpg?v=1589486022","width":1366},{"alt":null,"id":6145394212937,"position":3,"preview_image":{"aspect_ratio":1.333,"height":600,"width":800,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder3.jpg?v=1589486022"},"aspect_ratio":1.333,"height":600,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder3.jpg?v=1589486022","width":800},{"alt":null,"id":6145394245705,"position":4,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder4.jpg?v=1589486022"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAS40-AS40HSingleturnAbsoluteEncoder4.jpg?v=1589486022","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe versatile position detectors\u003c\/h4\u003e\n\u003cp\u003eThe rugged singleturn encoders AS...40 and AS...H 40 can be deployed in a wide variety of applications to detect positions in steel and rolling mills, in mining operations as well as in ports and crane systems. They supply precise information about the position of the shaft; they are installed for position measuring as well as positioning tasks. Thanks in particular to the extremely rugged foot construction it is possible to easily attach additional encoders to the second shaft end.c\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eASE 40 \/ ASEH 40, ASS 40 \/ ASSH 40, ASSI 40 \/ ASSIH 40, ASPA 40 \/ ASPAH 40\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eHeavy-duty design, other encoder can be attached\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eHigh signal quality, up to 16 bit singleturn, variety of interfaces\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003eOptions: Second interface, additional incremental outputs\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSingleturn max. 16 bit (65536 steps per rotation)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of interfaces\u003c\/td\u003e\n\u003ctd\u003e1 or 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\/Product Name\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eEtherCAT  |  ASE 40 \/ ASEH 40\u003c\/li\u003e\n\u003cli\u003eSSI  |  ASS 40 \/ ASSH 40\u003c\/li\u003e\n\u003cli\u003eSSI-Inkremental  |  ASSI 40 \/ ASSIH 40\u003c\/li\u003e\n\u003cli\u003eParallel  |  ASPA 40 \/ ASPAH 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 6000 rpm\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 4000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003cli\u003eFieldbus box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 20 mm with keyway; Ø 16 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 4.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional single incremental output\u003c\/li\u003e\n\u003cli\u003eAdditional double incremental output with reference pulse in second terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_ams40-ass40_Manual_-_2020.pdf?v=1589487767\" target=\"_blank\" title=\"Hubner AS Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner AS Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_as-am-al-40-41-60_Absolute_Encoder_Catalogue_-_2020.pdf?v=1589487942\" target=\"_blank\" title=\"Hubner AS Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner AS Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461525270601,"title":"Hubner ERC 40 Electronic Position Switches","handle":"hubner-erc-40-electronic-position-switches","description":"\u003ch4\u003eAcid resistant thanks to stainless steel housing\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FG(HJ) INOX are our acid-, alkali- and saltwater-resistant encoders. Their stainless steel housing ensures they function long-term perfectly under the influence of aggressive media in heavy-industry environments. The encoders are highly resistant to shock and vibration loads; ingress protection up to IP66. They offer high signal quality (HTL, TTL) up to 2048 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as offshore applications or chemical industry.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 17 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eExtreme acids-, alkalis- and saltwater-resistant (V4A stainless steel housing) \u003c\/li\u003e\n\u003cli\u003eLong-living isolating hybrid bearings\u003c\/li\u003e\n\u003cli\u003eOptions: additional speed switch (set ex works), FOC transmitter, cable protection system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1 - 2048 (set ex works, selectable)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N und invertierte Signale\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6000 rpm \/ 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm with clamp or Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eS: Electronic overspeed switch, one signal output, set ex works\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional cable protection system made of stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eResistance to corrosive environments (e.g. acids and alkalis)\u003c\/li\u003e\n\u003cli\u003eSuitable for wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eSaltwater-proof\u003c\/li\u003e\n\u003cli\u003eLong-living hybrid bearings (isolating against shaft-currents)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T13:47:44-06:00","created_at":"2020-05-14T13:47:44-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512106008649,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner ERC 40 Electronic Position Switches","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerERC40PositionSwitch.jpg?v=1589487641"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerERC40PositionSwitch.jpg?v=1589487641","options":["Title"],"media":[{"alt":null,"id":6145577517129,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerERC40PositionSwitch.jpg?v=1589487641"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerERC40PositionSwitch.jpg?v=1589487641","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eAcid resistant thanks to stainless steel housing\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FG(HJ) INOX are our acid-, alkali- and saltwater-resistant encoders. Their stainless steel housing ensures they function long-term perfectly under the influence of aggressive media in heavy-industry environments. The encoders are highly resistant to shock and vibration loads; ingress protection up to IP66. They offer high signal quality (HTL, TTL) up to 2048 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as offshore applications or chemical industry.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 17 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eExtreme acids-, alkalis- and saltwater-resistant (V4A stainless steel housing) \u003c\/li\u003e\n\u003cli\u003eLong-living isolating hybrid bearings\u003c\/li\u003e\n\u003cli\u003eOptions: additional speed switch (set ex works), FOC transmitter, cable protection system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1 - 2048 (set ex works, selectable)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N und invertierte Signale\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6000 rpm \/ 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm with clamp or Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eS: Electronic overspeed switch, one signal output, set ex works\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional cable protection system made of stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eResistance to corrosive environments (e.g. acids and alkalis)\u003c\/li\u003e\n\u003cli\u003eSuitable for wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eSaltwater-proof\u003c\/li\u003e\n\u003cli\u003eLong-living hybrid bearings (isolating against shaft-currents)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461518159945,"title":"Hubner AM40 \/ AMH40 (Multiturn) Absolute Encoders","handle":"hubner-am40-amh-0-multiturn-absolute-encoders","description":"\u003ch4\u003eThe versatile positions and rotational speed detectors\u003c\/h4\u003e\n\u003cp\u003eThe rugged multiturn encoders AM...40 and AM...H 40 can be deployed in a wide variety of applications to detect positions and rotational speeds in rolling and steel mills, in mining operations as well as in ports and crane systems. They supply precise information about the position of the shaft and the number of rotations; for example, they are installed in hoisting gear applications to be able to determine the exact position at all times. Thanks in particular to the extremely rugged foot construction it is possible to easily attach additional encoders to the second shaft end.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAMP 40 \/ AMPH 40, AMN 40 \/ AMNH 40, AMS 40 \/ AMSH 40, AMSI 40 \/ AMSIH 40\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design, other encoder can be attached\u003c\/li\u003e\n\u003cli\u003eHigh signal quality, up to 16 bit singleturn and 12 bit multiturn, variety of interfaces\u003c\/li\u003e\n\u003cli\u003eOptions: Second interface, additional incremental outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMultiturn max. 12 bit (4096 rotations)\u003c\/li\u003e\n\u003cli\u003eSingleturn max. 16 bit (65536 steps per rotation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of interfaces\u003c\/td\u003e\n\u003ctd\u003e1 or 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\/Product Name\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIBUS-DP  |  AMP 40 \/ AMPH 40\u003c\/li\u003e\n\u003cli\u003eDeviceNet  |  AMN 40 \/ AMNH 40\u003c\/li\u003e\n\u003cli\u003eSSI  |  AMS 40 \/ AMSH 40\u003c\/li\u003e\n\u003cli\u003eSSI-Inkremental  |  AMSI 40 \/ AMSIH 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 6000 rpm\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 4000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003cli\u003eFieldbus box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: Ø 11 mm or Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft: Ø 20 mm with keyway; Ø 16 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 4.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional single incremental output\u003c\/li\u003e\n\u003cli\u003eAdditional double incremental output with reference pulse in second terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_ams40-ass40_Manual_-_2020.pdf?v=1589487767\" target=\"_blank\" title=\"Hubner AM40 Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner AM Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_as-am-al-40-41-60_Absolute_Encoder_Catalogue_-_2020.pdf?v=1589487942\" target=\"_blank\" title=\"Hubner AM Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner AM Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:43:49-06:00","created_at":"2020-05-14T13:43:49-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512085037129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner AM40 \/ AMH40 (Multiturn) Absolute Encoders","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder1.jpg?v=1589487670","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder2.jpg?v=1589487670","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder3.jpg?v=1589487670"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder1.jpg?v=1589487670","options":["Title"],"media":[{"alt":null,"id":6145580564553,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder1.jpg?v=1589487670"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder1.jpg?v=1589487670","width":1366},{"alt":null,"id":6145580597321,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder2.jpg?v=1589487670"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder2.jpg?v=1589487670","width":1366},{"alt":null,"id":6145580630089,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder3.jpg?v=1589487670"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerAM40AbsoluteEncoder3.jpg?v=1589487670","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe versatile positions and rotational speed detectors\u003c\/h4\u003e\n\u003cp\u003eThe rugged multiturn encoders AM...40 and AM...H 40 can be deployed in a wide variety of applications to detect positions and rotational speeds in rolling and steel mills, in mining operations as well as in ports and crane systems. They supply precise information about the position of the shaft and the number of rotations; for example, they are installed in hoisting gear applications to be able to determine the exact position at all times. Thanks in particular to the extremely rugged foot construction it is possible to easily attach additional encoders to the second shaft end.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAMP 40 \/ AMPH 40, AMN 40 \/ AMNH 40, AMS 40 \/ AMSH 40, AMSI 40 \/ AMSIH 40\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design, other encoder can be attached\u003c\/li\u003e\n\u003cli\u003eHigh signal quality, up to 16 bit singleturn and 12 bit multiturn, variety of interfaces\u003c\/li\u003e\n\u003cli\u003eOptions: Second interface, additional incremental outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMultiturn max. 12 bit (4096 rotations)\u003c\/li\u003e\n\u003cli\u003eSingleturn max. 16 bit (65536 steps per rotation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of interfaces\u003c\/td\u003e\n\u003ctd\u003e1 or 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\/Product Name\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIBUS-DP  |  AMP 40 \/ AMPH 40\u003c\/li\u003e\n\u003cli\u003eDeviceNet  |  AMN 40 \/ AMNH 40\u003c\/li\u003e\n\u003cli\u003eSSI  |  AMS 40 \/ AMSH 40\u003c\/li\u003e\n\u003cli\u003eSSI-Inkremental  |  AMSI 40 \/ AMSIH 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 6000 rpm\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 4000 rpm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003cli\u003eFieldbus box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: Ø 11 mm or Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft: Ø 20 mm with keyway; Ø 16 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 4.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional single incremental output\u003c\/li\u003e\n\u003cli\u003eAdditional double incremental output with reference pulse in second terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_ams40-ass40_Manual_-_2020.pdf?v=1589487767\" target=\"_blank\" title=\"Hubner AM40 Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner AM Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_as-am-al-40-41-60_Absolute_Encoder_Catalogue_-_2020.pdf?v=1589487942\" target=\"_blank\" title=\"Hubner AM Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner AM Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461510426697,"title":"Hubner FG INOX \/ FGHJ INOX Incremental Encoders","handle":"hubner-fg-inox-fghj-inox-incremental-encoders","description":"\u003ch4\u003eAcid resistant thanks to stainless steel housing\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FG(HJ) INOX are our acid-, alkali- and saltwater-resistant encoders. Their stainless steel housing ensures they function long-term perfectly under the influence of aggressive media in heavy-industry environments. The encoders are highly resistant to shock and vibration loads; ingress protection up to IP66. They offer high signal quality (HTL, TTL) up to 2048 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as offshore applications or chemical industry.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 17 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eExtreme acids-, alkalis- and saltwater-resistant (V4A stainless steel housing) \u003c\/li\u003e\n\u003cli\u003eLong-living isolating hybrid bearings\u003c\/li\u003e\n\u003cli\u003eOptions: additional speed switch (set ex works), FOC transmitter, cable protection system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1 - 2048 (set ex works, selectable)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N und invertierte Signale\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6000 rpm \/ 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm with clamp or Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eS: Electronic overspeed switch, one signal output, set ex works\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional cable protection system made of stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eResistance to corrosive environments (e.g. acids and alkalis)\u003c\/li\u003e\n\u003cli\u003eSuitable for wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eSaltwater-proof\u003c\/li\u003e\n\u003cli\u003eLong-living hybrid bearings (isolating against shaft-currents)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T13:39:43-06:00","created_at":"2020-05-14T13:39:44-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512054628425,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FG INOX \/ FGHJ INOX Incremental Encoders","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder1.jpg?v=1589485339","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder2.jpg?v=1589485339","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder3.jpg?v=1589485339","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder4.jpg?v=1589485339"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder1.jpg?v=1589485339","options":["Title"],"media":[{"alt":null,"id":6145326973001,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder1.jpg?v=1589485339"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder1.jpg?v=1589485339","width":1366},{"alt":null,"id":6145327005769,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder2.jpg?v=1589485339"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder2.jpg?v=1589485339","width":1366},{"alt":null,"id":6145327038537,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder3.jpg?v=1589485339"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder3.jpg?v=1589485339","width":1366},{"alt":null,"id":6145327071305,"position":4,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder4.jpg?v=1589485339"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGINOX-FGHJINOXEncoder4.jpg?v=1589485339","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eAcid resistant thanks to stainless steel housing\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FG(HJ) INOX are our acid-, alkali- and saltwater-resistant encoders. Their stainless steel housing ensures they function long-term perfectly under the influence of aggressive media in heavy-industry environments. The encoders are highly resistant to shock and vibration loads; ingress protection up to IP66. They offer high signal quality (HTL, TTL) up to 2048 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as offshore applications or chemical industry.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 17 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eExtreme acids-, alkalis- and saltwater-resistant (V4A stainless steel housing) \u003c\/li\u003e\n\u003cli\u003eLong-living isolating hybrid bearings\u003c\/li\u003e\n\u003cli\u003eOptions: additional speed switch (set ex works), FOC transmitter, cable protection system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1 - 2048 (set ex works, selectable)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N und invertierte Signale\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e6000 rpm \/ 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm with clamp or Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eS: Electronic overspeed switch, one signal output, set ex works\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional cable protection system made of stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eResistance to corrosive environments (e.g. acids and alkalis)\u003c\/li\u003e\n\u003cli\u003eSuitable for wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eSaltwater-proof\u003c\/li\u003e\n\u003cli\u003eLong-living hybrid bearings (isolating against shaft-currents)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461504823369,"title":"Hubner FG 41 SIL 3 \/ FGH 41 SIL 3 Incremental Encoders","handle":"hubner-fg-41-sil-3-fgh-41-sil-3-incremental-encoders","description":"\u003ch4\u003eRobust solutions with safety certification\u003c\/h4\u003e\n\u003cp\u003eThe extremely rugged incremental encoders FG 41 (solid shaft) \/ FGH 41 (hollow shaft) are specifically designed for safety applications in heavy industry. The SIL certified series offers a high level of safety up to SIL 2 \/ PL d (position oriented) and SIL 3 \/ PL e (speed oriented). The encoders are highly resistant to shock and vibration loads, with degree of protection up to IP67. Day offer a high signal quality (HTL, TTL, Sin\/Cos) up to 4096 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as in wet areas in rolling mills or sea air.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eCertified for safety applications up to SIL 3 \/ PL e\u003c\/li\u003e\n\u003cli\u003eHigh signal quality, HTL, TTL, sin\/cos, up to 4096 pulses\u003c\/li\u003e\n\u003cli\u003eOptions: safety certified solid or hollow shaft attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL\u003c\/li\u003e\n\u003cli\u003eSin\/Cos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1024, 2048, 4096\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90° and inverted signals,\u003cbr\u003eReference pulse (N) without SIL \/ PL, with inverted signal\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 4000 rpm \/ HTL and TTL: 100 kHz; Sin\/Cos: 500 kHz\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 3000 rpm \/ HTL and TTL: 100 kHz; Sin\/Cos 500 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5 \/ B35): Ø 11 mm or Ø 14 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHollow shaft: Ø 20 mm with keyway (for shafts up to max. length: 48 mm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-40 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eup to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.0 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft, construction type B35 only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eFor speed oriented safety functions SLS, SSR, SSM, SLA, SAR: SIL 3 (DIN EN 61508); PL e \/ category 3 (DIN EN ISO 13849)\u003c\/li\u003e\n\u003cli\u003eFor position oriented safety functions SDI, SS1, SS2, SOS, SLP, SLI, SCA: SIL 2 (DIN EN 61508); PL d \/ category 3 (DIN EN ISO 13849)\u003c\/li\u003e\n\u003cli\u003eSuitable for wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eSaltwater-proof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40_User_Manual_-_2020.pdf?v=1589488446\" target=\"_blank\" title=\"Hubner FG41 Incremental Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner FG41 Incremental Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40-40ex-41_Catalogue_-_2020.pdf?v=1589488435\" target=\"_blank\" title=\"Hubner FG41 Incremental Encoder Catalogue\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eHubner FG41 Incremental Encoder Catalogue\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:36:55-06:00","created_at":"2020-05-14T13:36:55-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31512041455689,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FG 41 SIL 3 \/ FGH 41 SIL 3 Incremental Encoders","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder1.jpg?v=1589485129","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder2.jpg?v=1589485130","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder3.jpg?v=1589485130","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder4.jpg?v=1589485130"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder1.jpg?v=1589485129","options":["Title"],"media":[{"alt":null,"id":6145311670345,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder1.jpg?v=1589485129"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder1.jpg?v=1589485129","width":1366},{"alt":null,"id":6145311735881,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder2.jpg?v=1589485130"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder2.jpg?v=1589485130","width":1366},{"alt":null,"id":6145311801417,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder3.jpg?v=1589485130"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder3.jpg?v=1589485130","width":1366},{"alt":null,"id":6145311834185,"position":4,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder4.jpg?v=1589485130"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG41SIL3-FGH41SIL3Encoder4.jpg?v=1589485130","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eRobust solutions with safety certification\u003c\/h4\u003e\n\u003cp\u003eThe extremely rugged incremental encoders FG 41 (solid shaft) \/ FGH 41 (hollow shaft) are specifically designed for safety applications in heavy industry. The SIL certified series offers a high level of safety up to SIL 2 \/ PL d (position oriented) and SIL 3 \/ PL e (speed oriented). The encoders are highly resistant to shock and vibration loads, with degree of protection up to IP67. Day offer a high signal quality (HTL, TTL, Sin\/Cos) up to 4096 pulses to guarantee exact measurement results even in particularly harsh operating conditions such as in wet areas in rolling mills or sea air.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eCertified for safety applications up to SIL 3 \/ PL e\u003c\/li\u003e\n\u003cli\u003eHigh signal quality, HTL, TTL, sin\/cos, up to 4096 pulses\u003c\/li\u003e\n\u003cli\u003eOptions: safety certified solid or hollow shaft attachment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL\u003c\/li\u003e\n\u003cli\u003eSin\/Cos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e1024, 2048, 4096\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90° and inverted signals,\u003cbr\u003eReference pulse (N) without SIL \/ PL, with inverted signal\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 4000 rpm \/ HTL and TTL: 100 kHz; Sin\/Cos: 500 kHz\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 3000 rpm \/ HTL and TTL: 100 kHz; Sin\/Cos 500 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5 \/ B35): Ø 11 mm or Ø 14 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHollow shaft: Ø 20 mm with keyway (for shafts up to max. length: 48 mm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-40 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eup to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.0 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft, construction type B35 only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eFor speed oriented safety functions SLS, SSR, SSM, SLA, SAR: SIL 3 (DIN EN 61508); PL e \/ category 3 (DIN EN ISO 13849)\u003c\/li\u003e\n\u003cli\u003eFor position oriented safety functions SDI, SS1, SS2, SOS, SLP, SLI, SCA: SIL 2 (DIN EN 61508); PL d \/ category 3 (DIN EN ISO 13849)\u003c\/li\u003e\n\u003cli\u003eSuitable for wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eSaltwater-proof\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40_User_Manual_-_2020.pdf?v=1589488446\" target=\"_blank\" title=\"Hubner FG41 Incremental Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner FG41 Incremental Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40-40ex-41_Catalogue_-_2020.pdf?v=1589488435\" target=\"_blank\" title=\"Hubner FG41 Incremental Encoder Catalogue\" rel=\"noopener noreferrer\"\u003e\u003cspan\u003eHubner FG41 Incremental Encoder Catalogue\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461495713865,"title":"Hubner UO-EM-FG4 Incremental Encoder Module - Universal Encoder Systems","handle":"hubner-uo-em-fg4-incremental-encoder-module-universal-encoder-systems","description":"\u003ch4\u003eThe speed signallers\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoder modules for detecting speed offer three types of signals: shifted 90 degrees to the basic pulse phase, mechanically fixed reference pulse and inverted signals.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput of speed-dependent square wave pulses\u003c\/li\u003e\n\u003cli\u003e1024 pulses per rotation \/ HTL or TTL\u003c\/li\u003e\n\u003cli\u003eOutput signals 0°, 90°, reference pulse and inverted signals\u003c\/li\u003e\n\u003cli\u003eTransmission frequency up to 100 kHz \/ overload display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal outputs\/Interfaces\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL (0°, 90°, N, ERR and respective inverted)\u003c\/li\u003e\n\u003cli\u003ePulse rate: 1024\u003c\/li\u003e\n\u003cli\u003eMaximum frequency: 100 kHz\u003c\/li\u003e\n\u003cli\u003eLED indicator: Overload at outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eScrew terminals to connect the incremental output signals\u003c\/li\u003e\n\u003cli\u003eSeries connectors to preceding and following modules (internal bus connection)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e99.5 x 22.5 x 114.5 mm (modular electronics housing for DIN rail)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +70 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP20 (switchboard installation)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCombines with other modules belonging to the U-ONE System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T13:31:46-06:00","created_at":"2020-05-14T13:31:46-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511999152201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner UO-EM-FG4 Incremental Encoder Module - Universal Encoder Systems","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule1.jpg?v=1589484801","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule2.jpg?v=1589484801"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule1.jpg?v=1589484801","options":["Title"],"media":[{"alt":null,"id":6145289617481,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule1.jpg?v=1589484801"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule1.jpg?v=1589484801","width":1366},{"alt":null,"id":6145289650249,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule2.jpg?v=1589484801"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerUO-EM-FG4U-OneEncoderModule2.jpg?v=1589484801","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe speed signallers\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoder modules for detecting speed offer three types of signals: shifted 90 degrees to the basic pulse phase, mechanically fixed reference pulse and inverted signals.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput of speed-dependent square wave pulses\u003c\/li\u003e\n\u003cli\u003e1024 pulses per rotation \/ HTL or TTL\u003c\/li\u003e\n\u003cli\u003eOutput signals 0°, 90°, reference pulse and inverted signals\u003c\/li\u003e\n\u003cli\u003eTransmission frequency up to 100 kHz \/ overload display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal outputs\/Interfaces\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL (0°, 90°, N, ERR and respective inverted)\u003c\/li\u003e\n\u003cli\u003ePulse rate: 1024\u003c\/li\u003e\n\u003cli\u003eMaximum frequency: 100 kHz\u003c\/li\u003e\n\u003cli\u003eLED indicator: Overload at outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eScrew terminals to connect the incremental output signals\u003c\/li\u003e\n\u003cli\u003eSeries connectors to preceding and following modules (internal bus connection)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e99.5 x 22.5 x 114.5 mm (modular electronics housing for DIN rail)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +70 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP20 (switchboard installation)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCombines with other modules belonging to the U-ONE System\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461474218057,"title":"Hubner UOC 40 \/ USC 42 SIL 2 (U-ONE-Compact) Universal Encoder Systems","handle":"hubner-uoc-40-usc-42-sil-2-u-one-compact-universal-encoder-systems","description":"\u003ch4\u003eThe compact all-in-one systems\u003c\/h4\u003e\n\u003cp\u003eThe compact universal encoder systems U-ONE-(SAFETY-) Compact combine a variety of functions in a rugged housing. They sense and monitor speeds and positions. Consequently, they are ideally suitable for easy upgrades to legacy solutions when the existing cabling is to remain in use or if there is no space available in the switchboard for electronic function modules. The multifunctional construction simplifies their installation and connection. Thanks to direct attachment to the shaft to be monitored the all-in-one systems do not required any additional mechanical components such as transfer gearboxes, transfer couplings or speed step-up gearing; and on top of that they offer greater accuracy. They are optionally certified for safety applications up to SIL 2 \/ PL d.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eØ 14 mm solid shaft (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eHeavy-duty housing with directly attached function modules\u003c\/li\u003e\n\u003cli\u003eHigh signal quality for more reliable detection of speed and position\u003c\/li\u003e\n\u003cli\u003eOptions: Variety of output signals, SIL 2 \/ PL d certification (USC 42)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e15-27 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMultiturn 15 bit (32768 rotations)\u003c\/li\u003e\n\u003cli\u003eSingleturn 13 bit (8192 steps per rotation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching outputs\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSpeed and position switch modules (NO contact 5…230 V \/ 0.5 A AC\/DC):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed switch (0.5-2520 rpm) \u003c\/li\u003e\n\u003cli\u003ePosition switch (max. 32768 rotations)\u003c\/li\u003e\n\u003cli\u003eFailure switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFurther switching functions on request\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal outputs\/Interfaces\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBasic unit (SCU):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent output 4-20 mA (without SIL)\u003c\/li\u003e\n\u003cli\u003eIncremental output 1024 \/ 4096 pulses configurable (without SIL)\u003c\/li\u003e\n\u003cli\u003eStatus output and error output\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbsolute value interface (bus module) UOC 40:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIBUS-DP (without SIL): Resolution: 12 bit singleturn \/ 12 bit multiturn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbsolute value interface (bus module) USC 42:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIsafe via PROFIBUS-DP (SIL 2 \/ PL d): Resolution: 13 bit singleturn \/ 15 bit multiturn\u003cbr\u003e(PROFIBUS-DP: RS485, baud rate 9.6 kbit\/s...12 Mbit\/s, device address 1-99 possible)\u003c\/li\u003e\n\u003cli\u003ePROFIsafe via PROFINET IO (SIL 2 \/ PL d)\u003cbr\u003e(PROFINET IO: Transmission rate 100 Mbit\/s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft: up to 2800 rpm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eBase module: Terminal box (copper cable) + USB interface\u003c\/li\u003e\n\u003cli\u003eSwitching module: Terminal box (copper cable)\u003c\/li\u003e\n\u003cli\u003eTermination module: Fieldbus box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft (B5, B35) \/ Ø 14 mm with feather key\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +70 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.6 kg + 0.8 kg\/module\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eModularly extendable (compact combination of different electronic function modules)\u003c\/li\u003e\n\u003cli\u003eSIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849); Category 3 (DIN EN ISO 13849) with USC 42\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFor USC 42: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849); Category 3 (DIN EN ISO 13849),  \u003cbr\u003esystem-wide two channel architecture incl. internal cross-checking\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T13:21:52-06:00","created_at":"2020-05-14T13:21:52-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511912382537,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner UOC 40 \/ USC 42 SIL 2 (U-ONE-Compact) Universal Encoder Systems","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder1.jpg?v=1589484313","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder2.jpg?v=1589484313","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder3.jpg?v=1589484313"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder1.jpg?v=1589484313","options":["Title"],"media":[{"alt":null,"id":6145239711817,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder1.jpg?v=1589484313"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder1.jpg?v=1589484313","width":1366},{"alt":null,"id":6145239744585,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder2.jpg?v=1589484313"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder2.jpg?v=1589484313","width":1366},{"alt":null,"id":6145239777353,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder3.jpg?v=1589484313"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerU-OneEncoder3.jpg?v=1589484313","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe compact all-in-one systems\u003c\/h4\u003e\n\u003cp\u003eThe compact universal encoder systems U-ONE-(SAFETY-) Compact combine a variety of functions in a rugged housing. They sense and monitor speeds and positions. Consequently, they are ideally suitable for easy upgrades to legacy solutions when the existing cabling is to remain in use or if there is no space available in the switchboard for electronic function modules. The multifunctional construction simplifies their installation and connection. Thanks to direct attachment to the shaft to be monitored the all-in-one systems do not required any additional mechanical components such as transfer gearboxes, transfer couplings or speed step-up gearing; and on top of that they offer greater accuracy. They are optionally certified for safety applications up to SIL 2 \/ PL d.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eØ 14 mm solid shaft (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eHeavy-duty housing with directly attached function modules\u003c\/li\u003e\n\u003cli\u003eHigh signal quality for more reliable detection of speed and position\u003c\/li\u003e\n\u003cli\u003eOptions: Variety of output signals, SIL 2 \/ PL d certification (USC 42)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e15-27 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eMultiturn 15 bit (32768 rotations)\u003c\/li\u003e\n\u003cli\u003eSingleturn 13 bit (8192 steps per rotation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching outputs\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSpeed and position switch modules (NO contact 5…230 V \/ 0.5 A AC\/DC):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed switch (0.5-2520 rpm) \u003c\/li\u003e\n\u003cli\u003ePosition switch (max. 32768 rotations)\u003c\/li\u003e\n\u003cli\u003eFailure switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFurther switching functions on request\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal outputs\/Interfaces\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBasic unit (SCU):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent output 4-20 mA (without SIL)\u003c\/li\u003e\n\u003cli\u003eIncremental output 1024 \/ 4096 pulses configurable (without SIL)\u003c\/li\u003e\n\u003cli\u003eStatus output and error output\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbsolute value interface (bus module) UOC 40:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIBUS-DP (without SIL): Resolution: 12 bit singleturn \/ 12 bit multiturn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAbsolute value interface (bus module) USC 42:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePROFIsafe via PROFIBUS-DP (SIL 2 \/ PL d): Resolution: 13 bit singleturn \/ 15 bit multiturn\u003cbr\u003e(PROFIBUS-DP: RS485, baud rate 9.6 kbit\/s...12 Mbit\/s, device address 1-99 possible)\u003c\/li\u003e\n\u003cli\u003ePROFIsafe via PROFINET IO (SIL 2 \/ PL d)\u003cbr\u003e(PROFINET IO: Transmission rate 100 Mbit\/s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum rotation\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft: up to 2800 rpm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eBase module: Terminal box (copper cable) + USB interface\u003c\/li\u003e\n\u003cli\u003eSwitching module: Terminal box (copper cable)\u003c\/li\u003e\n\u003cli\u003eTermination module: Fieldbus box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft (B5, B35) \/ Ø 14 mm with feather key\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +70 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.6 kg + 0.8 kg\/module\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eModularly extendable (compact combination of different electronic function modules)\u003c\/li\u003e\n\u003cli\u003eSIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849); Category 3 (DIN EN ISO 13849) with USC 42\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eFor USC 42: SIL 2 (DIN EN 61508); PL d (DIN EN ISO 13849); Category 3 (DIN EN ISO 13849),  \u003cbr\u003esystem-wide two channel architecture incl. internal cross-checking\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461467959369,"title":"Hubner MAG Incremental Magnetic Encoders","handle":"hubner-mag-incremental-magnetic-encoders","description":"\u003ch4\u003eThe flexible encoders\u003c\/h4\u003e\n\u003cp\u003eThe bearingless, magnetic incremental MAG encoder systems are particularly flexible; thanks to the version with pulse wheel and scanning head they offer the highest levels of design freedom. They are suitable for direct attachment to shaft diameters up to approx. 1500 mm. Thanks to their narrow width of just 15 mm they are also particularly suitable for use in confined spaces. The pulse wheel is mounted directly onto the shaft where it also measures high speeds without any difficulty. MAG encoder systems are suitable for harsh operating conditions such as in roll stands, drive shaft assemblies on ships, for motors on excavators in open cast mining, tandem motors as well as gas and water turbines. The module variant with split pulse wheel offers a practical alternative for retrofitting and upgrading purposes or if there is no free shaft end available.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to approx. Ø 1500 mm and high speeds\u003c\/li\u003e\n\u003cli\u003eBearingless, extremely rugged and nonwearing, contactless scanning\u003c\/li\u003e\n\u003cli\u003eUp to 100 000 pulses HTL \/ TTL\u003c\/li\u003e\n\u003cli\u003eOptions: Additional magnetic track with reference pulse, FOC transmitter, overspeed switch, several scanning heads, stainless-steel ring, split pulse wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC (Option 5 VDC)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse rates 32 to 100000\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0° and 90° track, reference pulse, check output and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDepends on mechanical design \/ max. 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft \/ up to approx. Ø 1500 mm\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAxial tolerance: ±3 mm (offset scanning head\/pulse wheel), optional up to ±8 mm\u003c\/li\u003e\n\u003cli\u003eRadial tolerance: Up to 2.0 mm (air gap scanning head\/pulse wheel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-40 °C to +100 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C (UL\/CSA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66 to IP68\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSize dependent\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eS: Electronic overspeed switch with switching speed (0.63 to 5600 rpm) set ex-works\u003c\/li\u003e\n\u003cli\u003eFOC: Alternative encoder signals via fiber optic cable (50 \/ 125 μm or 62.5 \/ 125 μm)\u003c\/li\u003e\n\u003cli\u003eAdditional magnetic track with reference pulse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eOne-piece or split pulse wheel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_MAG_Encoder_Catalogue_-_2020.pdf?v=1589488716\" target=\"_blank\" title=\"Hubner MAG Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner MAG Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_MAG_Encoder_Brochure.pdf?v=1589488735\" target=\"_blank\" title=\"Hubner MAG Encoder Brochure\" rel=\"noopener noreferrer\"\u003eHubner MAG Encoder Brochure\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:18:42-06:00","created_at":"2020-05-14T13:18:42-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511857233993,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner MAG Incremental Magnetic Encoders","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder1.jpg?v=1589484008","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder2.jpg?v=1589484008","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder3.jpg?v=1589484009","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder4.jpg?v=1589484009"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder1.jpg?v=1589484008","options":["Title"],"media":[{"alt":null,"id":6145206911049,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder1.jpg?v=1589484008"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder1.jpg?v=1589484008","width":1366},{"alt":null,"id":6145206943817,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder2.jpg?v=1589484008"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder2.jpg?v=1589484008","width":1366},{"alt":null,"id":6145206976585,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder3.jpg?v=1589484009"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder3.jpg?v=1589484009","width":1366},{"alt":null,"id":6145207009353,"position":4,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder4.jpg?v=1589484009"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerMAGEncoder4.jpg?v=1589484009","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe flexible encoders\u003c\/h4\u003e\n\u003cp\u003eThe bearingless, magnetic incremental MAG encoder systems are particularly flexible; thanks to the version with pulse wheel and scanning head they offer the highest levels of design freedom. They are suitable for direct attachment to shaft diameters up to approx. 1500 mm. Thanks to their narrow width of just 15 mm they are also particularly suitable for use in confined spaces. The pulse wheel is mounted directly onto the shaft where it also measures high speeds without any difficulty. MAG encoder systems are suitable for harsh operating conditions such as in roll stands, drive shaft assemblies on ships, for motors on excavators in open cast mining, tandem motors as well as gas and water turbines. The module variant with split pulse wheel offers a practical alternative for retrofitting and upgrading purposes or if there is no free shaft end available.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to approx. Ø 1500 mm and high speeds\u003c\/li\u003e\n\u003cli\u003eBearingless, extremely rugged and nonwearing, contactless scanning\u003c\/li\u003e\n\u003cli\u003eUp to 100 000 pulses HTL \/ TTL\u003c\/li\u003e\n\u003cli\u003eOptions: Additional magnetic track with reference pulse, FOC transmitter, overspeed switch, several scanning heads, stainless-steel ring, split pulse wheel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC (Option 5 VDC)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePulse rates 32 to 100000\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0° and 90° track, reference pulse, check output and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDepends on mechanical design \/ max. 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e12-pole round connector M23\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft \/ up to approx. Ø 1500 mm\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAxial tolerance: ±3 mm (offset scanning head\/pulse wheel), optional up to ±8 mm\u003c\/li\u003e\n\u003cli\u003eRadial tolerance: Up to 2.0 mm (air gap scanning head\/pulse wheel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-40 °C to +100 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C (UL\/CSA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66 to IP68\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSize dependent\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eS: Electronic overspeed switch with switching speed (0.63 to 5600 rpm) set ex-works\u003c\/li\u003e\n\u003cli\u003eFOC: Alternative encoder signals via fiber optic cable (50 \/ 125 μm or 62.5 \/ 125 μm)\u003c\/li\u003e\n\u003cli\u003eAdditional magnetic track with reference pulse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eOne-piece or split pulse wheel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_MAG_Encoder_Catalogue_-_2020.pdf?v=1589488716\" target=\"_blank\" title=\"Hubner MAG Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner MAG Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_MAG_Encoder_Brochure.pdf?v=1589488735\" target=\"_blank\" title=\"Hubner MAG Encoder Brochure\" rel=\"noopener noreferrer\"\u003eHubner MAG Encoder Brochure\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461460848713,"title":"Hubner FG2 \/ FGHJ2 Incremental Encoder","handle":"hubner-fg2-fghj2-incremental-encoder","description":"\u003ch4\u003eThe rugged encoders\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FG 2 (solid shaft) and FGHJ 2 (hollow shaft) ensure the speed of standard, auxiliary and secondary drives is reliably measured. When attaching with an isolated coupling (solid shaft) or an isolating hybrid bearing (hollow shaft) they protect the drivetrain against damaging shaft currents. Short-term availability and additional options ensure they can be deployed in a wide variety of applications and are also suitable as simple replacement solutions for encoders supplied by third-party manufacturers. The axial terminal boxes offer sufficient space for straightforward wiring. The plug-in connectors are vibration-proof by design to ensure these are permanently secure even under extreme conditions.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 17 mm, solid shaft Ø 11 mm (flange mounting)\u003c\/li\u003e\n\u003cli\u003eBigger bearing for greater load-bearing capacity\u003c\/li\u003e\n\u003cli\u003e600, 1024, 2048, 4096 pulses HTL \/ TTL, others on request\u003c\/li\u003e\n\u003cli\u003eOptions: Second incremental output, FOC transmitter, additional overspeed switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e600, 1024, 2048, 4096 – others on request.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 7000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 6000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable (0.6 - 4 m)\u003c\/li\u003e\n\u003cli\u003ePlug-in connection ITT Cannon (pin configuration compatible with comparable devices from third-party manufacturers following consultation)\u003cbr\u003eOptions: Mating connector set comprising a 90° circular connection and EMC cable gland\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5) \/ Ø 11 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft (isolated bearings) \/ Ø 12 mm, Ø 16 mm with clamp, Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 2 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eS: Electronic overspeed switch; switching speed preset ex works\u003c\/li\u003e\n\u003cli\u003eFOC: Signal transmission via fiber optic cable 50 \/ 125 μm or 62.5 \/ 125 μm\u003c\/li\u003e\n\u003cli\u003eAKK: Second system with dedicated scanner and electronics for additional incremental output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft devices: Torque bracket (on request)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T13:14:54-06:00","created_at":"2020-05-14T13:14:54-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511837999177,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FG2 \/ FGHJ2 Incremental Encoder","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder1.jpg?v=1589483877","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder2.jpg?v=1589483877","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder3.jpg?v=1589483877"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder1.jpg?v=1589483877","options":["Title"],"media":[{"alt":null,"id":6145196752969,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder1.jpg?v=1589483877"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder1.jpg?v=1589483877","width":1366},{"alt":null,"id":6145196785737,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder2.jpg?v=1589483877"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder2.jpg?v=1589483877","width":1366},{"alt":null,"id":6145196818505,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder3.jpg?v=1589483877"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG2-FGH2Encoder3.jpg?v=1589483877","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe rugged encoders\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FG 2 (solid shaft) and FGHJ 2 (hollow shaft) ensure the speed of standard, auxiliary and secondary drives is reliably measured. When attaching with an isolated coupling (solid shaft) or an isolating hybrid bearing (hollow shaft) they protect the drivetrain against damaging shaft currents. Short-term availability and additional options ensure they can be deployed in a wide variety of applications and are also suitable as simple replacement solutions for encoders supplied by third-party manufacturers. The axial terminal boxes offer sufficient space for straightforward wiring. The plug-in connectors are vibration-proof by design to ensure these are permanently secure even under extreme conditions.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 17 mm, solid shaft Ø 11 mm (flange mounting)\u003c\/li\u003e\n\u003cli\u003eBigger bearing for greater load-bearing capacity\u003c\/li\u003e\n\u003cli\u003e600, 1024, 2048, 4096 pulses HTL \/ TTL, others on request\u003c\/li\u003e\n\u003cli\u003eOptions: Second incremental output, FOC transmitter, additional overspeed switch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e600, 1024, 2048, 4096 – others on request.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 7000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 6000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable (0.6 - 4 m)\u003c\/li\u003e\n\u003cli\u003ePlug-in connection ITT Cannon (pin configuration compatible with comparable devices from third-party manufacturers following consultation)\u003cbr\u003eOptions: Mating connector set comprising a 90° circular connection and EMC cable gland\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5) \/ Ø 11 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft (isolated bearings) \/ Ø 12 mm, Ø 16 mm with clamp, Ø 17 mm with taper 1:10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 2 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eS: Electronic overspeed switch; switching speed preset ex works\u003c\/li\u003e\n\u003cli\u003eFOC: Signal transmission via fiber optic cable 50 \/ 125 μm or 62.5 \/ 125 μm\u003c\/li\u003e\n\u003cli\u003eAKK: Second system with dedicated scanner and electronics for additional incremental output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft devices: Torque bracket (on request)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461438304329,"title":"Hubner FGH14 Incremental Encoder","handle":"hubner-fgh14-incremental-encoder","description":"\u003ch4\u003eExtremely rugged solution for main drives\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FGH 14 for continuous hollow shafts up to Ø 150 mm are mostly mounted directly onto the shaft. Thanks to the flat design they are ideally suitable for attaching further sensors such as speed switches, absolute encoders or combinations of these. Furthermore, there is also the option of a redundant configuration with two equal scanning systems and evaluation electronics. That increases safety or facilitates the provision of separate signals to the motor controls and a higher-level controller. The maintenance-friendly replacement scanning head facilitates simple changeover without separating the motor and gearing.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 150 mm\u003c\/li\u003e\n\u003cli\u003eB14 flange as basis to attach 4 more devices\u003c\/li\u003e\n\u003cli\u003eUp to 3600 pulses HTL \/ TTL\u003c\/li\u003e\n\u003cli\u003eOptions: Second signal output, FOC transmitter, overspeed switch, further signal options, maintenance-friendly replacement scanning head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e720, 1000, 1024, 1800, 3000, 3600\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0° track\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft: up to 2500 rpm (up to 800 rpm with IP66) \/ max. 100 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal box (copper cable or FOC connection)\u003c\/li\u003e\n\u003cli\u003ePlug-in connector (circular connector \/ industry quality connector)\u003c\/li\u003e\n\u003cli\u003ePreinstalled connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft \/ up to Ø 150 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 32 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRedundant version (KK) with second terminal box\u003c\/li\u003e\n\u003cli\u003eS: Electronic overspeed switch with two mutually independent, programmable switching points\u003c\/li\u003e\n\u003cli\u003eFOC: Encoder signals transmitted via a fiber optic cable\u003c\/li\u003e\n\u003cli\u003e90: Second pulse track as basic track, however, electrically phase shifted by 90°\u003c\/li\u003e\n\u003cli\u003eN\/N2: Mechanically fixed reference pulse (N), one square-wave pulse per revolution, with inverted signal\u003c\/li\u003e\n\u003cli\u003eG: Additional inverted output signals for basic track, 90° track, reference pulse including LED indication\u003c\/li\u003e\n\u003cli\u003e2F: Twice as many basic track pulses by combining the 0° and 90° tracks\u003c\/li\u003e\n\u003cli\u003eB: Rapid direction of rotation sensing at each edge of 0° and 90° tracks\u003c\/li\u003e\n\u003cli\u003eB2: Rapid direction of rotation sensing at each edge of 0° and 90° tracks; additional standstill detection\u003c\/li\u003e\n\u003cli\u003eV: Electronic doubling of the basic track and 90° track pulses through multiple evaluation\u003c\/li\u003e\n\u003cli\u003eL2: 150 mA power output for basic track, 90° track and their associated inverted signals\u003c\/li\u003e\n\u003cli\u003eJ: Optically adjusted pulse disk for reduced rotational frequency modulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eB14 flange for attachments\u003c\/li\u003e\n\u003cli\u003eMaintenance-friendly replaceable scanning head\u003c\/li\u003e\n\u003cli\u003eTorque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FGH14_User_Manual_-_2020.pdf?v=1589488623\" target=\"_blank\" title=\"Hubner FGH14 Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner FGH14 Encoder Manual\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T13:03:09-06:00","created_at":"2020-05-14T13:03:10-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511775805513,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FGH14 Incremental Encoder","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder1.jpg?v=1589483087","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder2.jpg?v=1589483087"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder1.jpg?v=1589483087","options":["Title"],"media":[{"alt":null,"id":6145133510729,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder1.jpg?v=1589483087"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder1.jpg?v=1589483087","width":1366},{"alt":null,"id":6145133543497,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder2.jpg?v=1589483087"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFGH14Encoder2.jpg?v=1589483087","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eExtremely rugged solution for main drives\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoders FGH 14 for continuous hollow shafts up to Ø 150 mm are mostly mounted directly onto the shaft. Thanks to the flat design they are ideally suitable for attaching further sensors such as speed switches, absolute encoders or combinations of these. Furthermore, there is also the option of a redundant configuration with two equal scanning systems and evaluation electronics. That increases safety or facilitates the provision of separate signals to the motor controls and a higher-level controller. The maintenance-friendly replacement scanning head facilitates simple changeover without separating the motor and gearing.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cp style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 150 mm\u003c\/li\u003e\n\u003cli\u003eB14 flange as basis to attach 4 more devices\u003c\/li\u003e\n\u003cli\u003eUp to 3600 pulses HTL \/ TTL\u003c\/li\u003e\n\u003cli\u003eOptions: Second signal output, FOC transmitter, overspeed switch, further signal options, maintenance-friendly replacement scanning head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHTL or TTL\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e720, 1000, 1024, 1800, 3000, 3600\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0° track\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft: up to 2500 rpm (up to 800 rpm with IP66) \/ max. 100 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal box (copper cable or FOC connection)\u003c\/li\u003e\n\u003cli\u003ePlug-in connector (circular connector \/ industry quality connector)\u003c\/li\u003e\n\u003cli\u003ePreinstalled connection cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHollow shaft \/ up to Ø 150 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-25 °C to +85 °C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 32 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRedundant version (KK) with second terminal box\u003c\/li\u003e\n\u003cli\u003eS: Electronic overspeed switch with two mutually independent, programmable switching points\u003c\/li\u003e\n\u003cli\u003eFOC: Encoder signals transmitted via a fiber optic cable\u003c\/li\u003e\n\u003cli\u003e90: Second pulse track as basic track, however, electrically phase shifted by 90°\u003c\/li\u003e\n\u003cli\u003eN\/N2: Mechanically fixed reference pulse (N), one square-wave pulse per revolution, with inverted signal\u003c\/li\u003e\n\u003cli\u003eG: Additional inverted output signals for basic track, 90° track, reference pulse including LED indication\u003c\/li\u003e\n\u003cli\u003e2F: Twice as many basic track pulses by combining the 0° and 90° tracks\u003c\/li\u003e\n\u003cli\u003eB: Rapid direction of rotation sensing at each edge of 0° and 90° tracks\u003c\/li\u003e\n\u003cli\u003eB2: Rapid direction of rotation sensing at each edge of 0° and 90° tracks; additional standstill detection\u003c\/li\u003e\n\u003cli\u003eV: Electronic doubling of the basic track and 90° track pulses through multiple evaluation\u003c\/li\u003e\n\u003cli\u003eL2: 150 mA power output for basic track, 90° track and their associated inverted signals\u003c\/li\u003e\n\u003cli\u003eJ: Optically adjusted pulse disk for reduced rotational frequency modulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eB14 flange for attachments\u003c\/li\u003e\n\u003cli\u003eMaintenance-friendly replaceable scanning head\u003c\/li\u003e\n\u003cli\u003eTorque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FGH14_User_Manual_-_2020.pdf?v=1589488623\" target=\"_blank\" title=\"Hubner FGH14 Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner FGH14 Encoder Manual\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4461429162057,"title":"Hubner FG40Ex Incremental Encoder with Explosion Proof Housing","handle":"hubner-fg40ex-incremental-encoder-with-explosion-proof-housing","description":"\u003ch4\u003eThe all-rounders with Ex protection\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe incremental, solid shaft encoders FG 40 Ex can be deployed in a wide variety of applications to measure the speed at standard, main and secondary drives in potentially explosive atmospheres, for example in the oil and gas industry as well as in petrochemical applications. Certified to EN 60079 (ATEX) and IEC 60079 (IECEx) the encoder is certified for applications in Zones 1 and 2 (gas) as well as Zones 21 and 22 (dust) and designed to meet degree of protection requirements IP66. Technically, they are based on the FG 40 models. The explosion-proof housings with detachable terminal box covers facilitate connecting the cables during on site installation. That in turn means it is possible to use different cable lengths to connect a device of the same type.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cdiv style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/div\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eATEX and IECEx certified (gas and dust) to EN\/IEC 60079\u003c\/li\u003e\n\u003cli\u003eExplosion-proof housing, salt-water proof aluminium, IP66\u003c\/li\u003e\n\u003cli\u003eUp to 250000 pulses HTL\/TTL, up to 2500 sine periods\u003c\/li\u003e\n\u003cli\u003eOption: Second signal output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL\u003c\/li\u003e\n\u003cli\u003eSin\/Cos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eStandard pulse rates for HTL, TTL and Sin\/Cos: 500, 600, 1000, 1024, 1200, 1300, 2500\u003c\/li\u003e\n\u003cli\u003eInterpolation factors (for HTL\/TTL pulses only): 1, 2, 4, 8, 10, 20, 40, 50, 100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N, status and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft: up to 6000 rpm \/ max. 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTerminal strip in a terminal box\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft (B5) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-40 °C to +60 °C (T6 up to +55 °C)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.9 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAK: System with terminal strip connections\u003c\/li\u003e\n\u003cli\u003eAKK: Two systems with terminal strip connections\u003c\/li\u003e\n\u003cli\u003eAH: HTL signals 0°, 90°, reference pulse, status; all signals each with respective inverted signals\u003c\/li\u003e\n\u003cli\u003eAT: TTL signals 0°, 90°, reference pulse, status; all signals each with respective inverted signals\u003c\/li\u003e\n\u003cli\u003eSH: 1 Vpp signals sine\/cosine, reference pulse; status as HTL signal; all signals each with respective inverted signals\u003c\/li\u003e\n\u003cli\u003eST: 1 Vpp signals sine\/cosine, reference pulse; status as TTL signal; all signals each with respective inverted signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAccessories: Cable glands and blanking plugs (not in scope of supply)\u003c\/p\u003e\n\u003cp\u003eIt is only allowed to use cable glands and blanking plugs that are approved and certified for the respective application in accordance with the standards EN\/IEC 60079-0 and EN\/IEC 60079-1 (gas) or EN\/IEC 60079-31 (dust).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eATEX and IECEx certified to EN\/IEC 60079:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGas: II 2G Ex db IIC T6-T5 Gb\u003c\/li\u003e\n\u003cli\u003eDust: II 2D Ex tb IIIC T85°C Db IP6x\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e","published_at":"2020-05-14T12:58:22-06:00","created_at":"2020-05-14T12:58:22-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511752605769,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FG40Ex Incremental Encoder with Explosion Proof Housing","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder.jpg?v=1589482809","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder2.jpg?v=1589482825","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder3.jpg?v=1589482835"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder.jpg?v=1589482809","options":["Title"],"media":[{"alt":null,"id":6145112047689,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder.jpg?v=1589482809"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder.jpg?v=1589482809","width":1366},{"alt":null,"id":6145113686089,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder2.jpg?v=1589482825"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder2.jpg?v=1589482825","width":1366},{"alt":null,"id":6145114341449,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder3.jpg?v=1589482835"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40ExEncoder3.jpg?v=1589482835","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe all-rounders with Ex protection\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003eThe incremental, solid shaft encoders FG 40 Ex can be deployed in a wide variety of applications to measure the speed at standard, main and secondary drives in potentially explosive atmospheres, for example in the oil and gas industry as well as in petrochemical applications. Certified to EN 60079 (ATEX) and IEC 60079 (IECEx) the encoder is certified for applications in Zones 1 and 2 (gas) as well as Zones 21 and 22 (dust) and designed to meet degree of protection requirements IP66. Technically, they are based on the FG 40 models. The explosion-proof housings with detachable terminal box covers facilitate connecting the cables during on site installation. That in turn means it is possible to use different cable lengths to connect a device of the same type.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cdiv style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/div\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eATEX and IECEx certified (gas and dust) to EN\/IEC 60079\u003c\/li\u003e\n\u003cli\u003eExplosion-proof housing, salt-water proof aluminium, IP66\u003c\/li\u003e\n\u003cli\u003eUp to 250000 pulses HTL\/TTL, up to 2500 sine periods\u003c\/li\u003e\n\u003cli\u003eOption: Second signal output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL\u003c\/li\u003e\n\u003cli\u003eSin\/Cos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eStandard pulse rates for HTL, TTL and Sin\/Cos: 500, 600, 1000, 1024, 1200, 1300, 2500\u003c\/li\u003e\n\u003cli\u003eInterpolation factors (for HTL\/TTL pulses only): 1, 2, 4, 8, 10, 20, 40, 50, 100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N, status and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft: up to 6000 rpm \/ max. 200 kHz\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTerminal strip in a terminal box\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSolid shaft (B5) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-40 °C to +60 °C (T6 up to +55 °C)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eIP66\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.9 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eAK: System with terminal strip connections\u003c\/li\u003e\n\u003cli\u003eAKK: Two systems with terminal strip connections\u003c\/li\u003e\n\u003cli\u003eAH: HTL signals 0°, 90°, reference pulse, status; all signals each with respective inverted signals\u003c\/li\u003e\n\u003cli\u003eAT: TTL signals 0°, 90°, reference pulse, status; all signals each with respective inverted signals\u003c\/li\u003e\n\u003cli\u003eSH: 1 Vpp signals sine\/cosine, reference pulse; status as HTL signal; all signals each with respective inverted signals\u003c\/li\u003e\n\u003cli\u003eST: 1 Vpp signals sine\/cosine, reference pulse; status as TTL signal; all signals each with respective inverted signals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eAccessories: Cable glands and blanking plugs (not in scope of supply)\u003c\/p\u003e\n\u003cp\u003eIt is only allowed to use cable glands and blanking plugs that are approved and certified for the respective application in accordance with the standards EN\/IEC 60079-0 and EN\/IEC 60079-1 (gas) or EN\/IEC 60079-31 (dust).\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eATEX and IECEx certified to EN\/IEC 60079:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGas: II 2G Ex db IIC T6-T5 Gb\u003c\/li\u003e\n\u003cli\u003eDust: II 2D Ex tb IIIC T85°C Db IP6x\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e"}

{"id":4461407043657,"title":"Hubner FG40 \/ FGH(J)40 Incremental encoders","handle":"hubner-fg40-fghj40-incremental-encoders","description":"\u003ch4\u003eThe all-rounders for speed measurement\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoder FG 40 (solid shaft) \/ FGH (J) 40 (hollow shaft) can be deployed in a wide variety of applications to measure the speed of standard, auxiliary and secondary drives in steel and rolling mills, in mining operations as well as in ports and crane systems. When attaching with an isolated coupling (solid shaft) or with optionally available isolating hybrid bearings (hollow shaft) they protect the drivetrain against damaging shaft currents. They offer a high signal quality and, if required, a high pulse rate for dynamic feed-back control across the entire speed range. In particular the rugged foot construction facilitates simple attachment of further encoders at the second shaft end.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cdiv style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/div\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eRobust design, other encoder can be attached\u003c\/li\u003e\n\u003cli\u003eUp to 1 million pulses HTL \/ TTL, up to 2500 sine periods\u003c\/li\u003e\n\u003cli\u003eOptions: Second signal output, FOC transmitter, additional programmable overspeed switch, hybrid bearing (FGHJ 40)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC (5 VDC optional)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL\u003c\/li\u003e\n\u003cli\u003eSin\/Cos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eStandard pulse rates HTL\/TTL: 500, 600, 1000, 1024, 1200, 1300, 2000, 2048, 2400, 2500\u003c\/li\u003e\n\u003cli\u003eSpecial pulse rates HTL\/TTL: 4000, 4096, 4800, 5000, 8192, 10000, 12000, 16000, 16384, 20000, 25000, 40000, 50000 up to 1 million\u003c\/li\u003e\n\u003cli\u003eStandard pulse rates Sin\/Cos: 500, 600, 1000, 1024, 1200, 1300, 2500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N, status and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 6000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 4000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway; Ø 16 mm, Ø 25 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-5 °C to +100 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRedundant incremental output\u003c\/li\u003e\n\u003cli\u003eS: Electronic overspeed switch with two mutually independent, programmable switching points.\u003c\/li\u003e\n\u003cli\u003eFOC: As an alternative to conventional signal transmissions via copper cables it is also possible to transmit encoder signals via a fiber optic cable.          \u003c\/li\u003e\n\u003cli\u003eN: Mechanically fixed reference pulse (N), one square-wave pulse per revolution, with inverted signal.                             \u003c\/li\u003e\n\u003cli\u003e2F: Twice as many basic track pulses by combining the 0° and 90° tracks.\u003c\/li\u003e\n\u003cli\u003eB: Rapid direction of rotation sensing at each edge of 0° and 90° tracks.       \u003c\/li\u003e\n\u003cli\u003eB2: Rapid direction of rotation sensing at each edge of 0° and 90° tracks; additional standstill detection.\u003c\/li\u003e\n\u003cli\u003eB3: Direction of rotation dependent output signals. This option supports counter cards with separate UP\/DOWN pulse inputs. Basic track signals are issued at optional output 1 when rotation is clockwise and at optional output 2 when rotation is counterclockwise.\u003c\/li\u003e\n\u003cli\u003eSH: 1 Vpp signals sin, cos, reference pulse. Status as HTL signal; all signals each with respective inverted signals.\u003c\/li\u003e\n\u003cli\u003eST: 1 Vpp signals sin, cos, reference pulse. Status as TTL signal; all signals each with respective inverted signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40_User_Manual_-_2020.pdf?v=1589488446\" target=\"_blank\" title=\"Hubner FG40 Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner FG40 Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40-40ex-41_Catalogue_-_2020.pdf?v=1589488435\" target=\"_blank\" title=\"Hubner FG40 Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner FG40 Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e","published_at":"2020-05-14T12:41:22-06:00","created_at":"2020-05-14T12:47:37-06:00","vendor":"Hubner","type":"Encoder","tags":[],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31511678058569,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hubner FG40 \/ FGH(J)40 Incremental encoders","public_title":null,"options":["Default Title"],"price":0,"weight":4536,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder.jpg?v=1589482146","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder2.jpg?v=1589482155","\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder3.jpg?v=1589482163"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder.jpg?v=1589482146","options":["Title"],"media":[{"alt":null,"id":6145044086857,"position":1,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder.jpg?v=1589482146"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder.jpg?v=1589482146","width":1366},{"alt":null,"id":6145046118473,"position":2,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder2.jpg?v=1589482155"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder2.jpg?v=1589482155","width":1366},{"alt":null,"id":6145046937673,"position":3,"preview_image":{"aspect_ratio":1.334,"height":1024,"width":1366,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder3.jpg?v=1589482163"},"aspect_ratio":1.334,"height":1024,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/HubnerFG40-FGH40Encoder3.jpg?v=1589482163","width":1366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch4\u003eThe all-rounders for speed measurement\u003c\/h4\u003e\n\u003cp\u003eThe incremental encoder FG 40 (solid shaft) \/ FGH (J) 40 (hollow shaft) can be deployed in a wide variety of applications to measure the speed of standard, auxiliary and secondary drives in steel and rolling mills, in mining operations as well as in ports and crane systems. When attaching with an isolated coupling (solid shaft) or with optionally available isolating hybrid bearings (hollow shaft) they protect the drivetrain against damaging shaft currents. They offer a high signal quality and, if required, a high pulse rate for dynamic feed-back control across the entire speed range. In particular the rugged foot construction facilitates simple attachment of further encoders at the second shaft end.\u003c\/p\u003e\n\u003ch1 style=\"text-align: center;\"\u003e*MADE IN GERMANY*\u003c\/h1\u003e\n\u003cdiv style=\"text-align: center;\"\u003eCall us today to find the best encoder for your application.\u003c\/div\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHollow shafts up to Ø 20 mm, solid shafts up to Ø 14 mm (flange or foot mounting)\u003c\/li\u003e\n\u003cli\u003eRobust design, other encoder can be attached\u003c\/li\u003e\n\u003cli\u003eUp to 1 million pulses HTL \/ TTL, up to 2500 sine periods\u003c\/li\u003e\n\u003cli\u003eOptions: Second signal output, FOC transmitter, additional programmable overspeed switch, hybrid bearing (FGHJ 40)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"table table-responsive\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply voltage\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e12-30 VDC (5 VDC optional)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal amplitude\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eHTL or TTL\u003c\/li\u003e\n\u003cli\u003eSin\/Cos\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePulse rate\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eStandard pulse rates HTL\/TTL: 500, 600, 1000, 1024, 1200, 1300, 2000, 2048, 2400, 2500\u003c\/li\u003e\n\u003cli\u003eSpecial pulse rates HTL\/TTL: 4000, 4096, 4800, 5000, 8192, 10000, 12000, 16000, 16384, 20000, 25000, 40000, 50000 up to 1 million\u003c\/li\u003e\n\u003cli\u003eStandard pulse rates Sin\/Cos: 500, 600, 1000, 1024, 1200, 1300, 2500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signals\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0°, 90°, N, status and inverted signals\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum frequency\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft: up to 6000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003cli\u003eHollow shaft: up to 4000 rpm \/ 200 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical connection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eTerminal strip in a terminal box\u003c\/li\u003e\n\u003cli\u003eFixed cable\u003c\/li\u003e\n\u003cli\u003e12-pole round connector Burndy\u003c\/li\u003e\n\u003cli\u003e15-pole industrial connector\u003c\/li\u003e\n\u003cli\u003eFOC connector in a terminal box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction type \/ Ø shafts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSolid shaft (B5, B35) \/ Ø 11 mm, Ø 14 mm with feather key\u003c\/li\u003e\n\u003cli\u003eHollow shaft \/ Ø 16 mm, Ø 19 mm, Ø 20 mm with keyway; Ø 16 mm, Ø 25 mm with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice temperature range\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e0 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e-25 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-40 °C to +85 °C\u003c\/li\u003e\n\u003cli\u003e-5 °C to +100 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDegree of protection\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUp to IP66 \/ IP67\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eApprox. 3.5 kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eRedundant incremental output\u003c\/li\u003e\n\u003cli\u003eS: Electronic overspeed switch with two mutually independent, programmable switching points.\u003c\/li\u003e\n\u003cli\u003eFOC: As an alternative to conventional signal transmissions via copper cables it is also possible to transmit encoder signals via a fiber optic cable.          \u003c\/li\u003e\n\u003cli\u003eN: Mechanically fixed reference pulse (N), one square-wave pulse per revolution, with inverted signal.                             \u003c\/li\u003e\n\u003cli\u003e2F: Twice as many basic track pulses by combining the 0° and 90° tracks.\u003c\/li\u003e\n\u003cli\u003eB: Rapid direction of rotation sensing at each edge of 0° and 90° tracks.       \u003c\/li\u003e\n\u003cli\u003eB2: Rapid direction of rotation sensing at each edge of 0° and 90° tracks; additional standstill detection.\u003c\/li\u003e\n\u003cli\u003eB3: Direction of rotation dependent output signals. This option supports counter cards with separate UP\/DOWN pulse inputs. Basic track signals are issued at optional output 1 when rotation is clockwise and at optional output 2 when rotation is counterclockwise.\u003c\/li\u003e\n\u003cli\u003eSH: 1 Vpp signals sin, cos, reference pulse. Status as HTL signal; all signals each with respective inverted signals.\u003c\/li\u003e\n\u003cli\u003eST: 1 Vpp signals sin, cos, reference pulse. Status as TTL signal; all signals each with respective inverted signals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical options\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003eSecond shaft end with B14 flange for attachments (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eAdditional foot (solid shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eIsolated ball bearing (hollow shaft construction type only)\u003c\/li\u003e\n\u003cli\u003eMI: Saliferous environment\u003c\/li\u003e\n\u003cli\u003eMS: Wet areas in rolling mills\u003c\/li\u003e\n\u003cli\u003eHollow shaft devices: Torque bracket (on request)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecial features and certificates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eUL\/CSA\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e \u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40_User_Manual_-_2020.pdf?v=1589488446\" target=\"_blank\" title=\"Hubner FG40 Encoder Manual\" rel=\"noopener noreferrer\"\u003eHubner FG40 Encoder Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2663\/3750\/files\/Hubner_FG40-40ex-41_Catalogue_-_2020.pdf?v=1589488435\" target=\"_blank\" title=\"Hubner FG40 Encoder Catalogue\" rel=\"noopener noreferrer\"\u003eHubner FG40 Encoder Catalogue\u003c\/a\u003e\u003c\/p\u003e"}

{"id":4446246633545,"title":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 120VAC Power Supply","handle":"crompton-262-series-led-digital-indicators-10vdc-input-120vac-power-supply","description":"\u003cp\u003e*Pricing valid only while inventory is available\u003c\/p\u003e\n\u003cp\u003eThe 262 series are a range of digital panel meters. These meters are versatile in the their measuring range which includes A.C. and D.C. current\/voltage. The 262-DDVU model offers input of 0-10 VDC with a number of display ranges available. The units display can be scaled from 0-1999. The PQ model is powered by 120VAC (See the BD model for 24VDC options).\u003c\/p\u003e\n\u003cp\u003eThe meter front is totally sealed and when panel mounted with an optional gasket is hose proof to IP66, allowing washing and use in wet areas, e.g. food industry, quarries, portable test gear. \u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003ch1\u003eFeatures\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSealed case front\u003c\/li\u003e\n\u003cli\u003eClear bright LED digits allow easy reading from up to 25 feet\u003c\/li\u003e\n\u003cli\u003eCustomised scaling allows OEM logo and engineering units\u003c\/li\u003e\n\u003cli\u003eAdvanced and rugged design allows simple installation and use\u003c\/li\u003e\n\u003cli\u003eUL Approved File No. E203000\u003c\/li\u003e\n\u003cli\u003eIP66 (front of panel using optional gasket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003cp class=\"hidden\"\u003e\u003cstrong\u003e262-DDVU-MTSM-PQ-61\u003c\/strong\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-750, Power Supply 120VAC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTSF-PQ-61:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-500, Power Supply \u003cspan\u003e120VAC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*All units can be scaled between 0-1999 to your application by our technicians.\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003e\u003c\/h2\u003e","published_at":"2020-05-01T14:15:00-06:00","created_at":"2020-05-01T14:15:00-06:00","vendor":"Crompton","type":"Crompton","tags":[],"price":17500,"price_min":17500,"price_max":17500,"available":true,"price_varies":false,"compare_at_price":29000,"compare_at_price_min":29000,"compare_at_price_max":29000,"compare_at_price_varies":false,"variants":[{"id":31456230637641,"title":"Scaled: 0-750 (262-DDVU-MTSM-PQ-61)","option1":"Scaled: 0-750 (262-DDVU-MTSM-PQ-61)","option2":null,"option3":null,"sku":"262-DDVU-MTSM-PQ-61","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 120VAC Power Supply - Scaled: 0-750 (262-DDVU-MTSM-PQ-61)","public_title":"Scaled: 0-750 (262-DDVU-MTSM-PQ-61)","options":["Scaled: 0-750 (262-DDVU-MTSM-PQ-61)"],"price":17500,"weight":907,"compare_at_price":29000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31456230670409,"title":"Scaled: 0-500 (262-DDVU-MTSF-PQ-61)","option1":"Scaled: 0-500 (262-DDVU-MTSF-PQ-61)","option2":null,"option3":null,"sku":"262-DDVU-MTSF-PQ-61","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 120VAC Power Supply - Scaled: 0-500 (262-DDVU-MTSF-PQ-61)","public_title":"Scaled: 0-500 (262-DDVU-MTSF-PQ-61)","options":["Scaled: 0-500 (262-DDVU-MTSF-PQ-61)"],"price":17500,"weight":907,"compare_at_price":29000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic_43ff51dc-c95f-4043-a206-9118452685e8.jpg?v=1588364277","\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterCutout_35cab403-5fcf-4e58-879b-f00741513e6c.png?v=1588364281"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic_43ff51dc-c95f-4043-a206-9118452685e8.jpg?v=1588364277","options":["Model"],"media":[{"alt":null,"id":6061018710089,"position":1,"preview_image":{"aspect_ratio":1.661,"height":174,"width":289,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic_43ff51dc-c95f-4043-a206-9118452685e8.jpg?v=1588364277"},"aspect_ratio":1.661,"height":174,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic_43ff51dc-c95f-4043-a206-9118452685e8.jpg?v=1588364277","width":289},{"alt":null,"id":6061019856969,"position":2,"preview_image":{"aspect_ratio":2.348,"height":227,"width":533,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterCutout_35cab403-5fcf-4e58-879b-f00741513e6c.png?v=1588364281"},"aspect_ratio":2.348,"height":227,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterCutout_35cab403-5fcf-4e58-879b-f00741513e6c.png?v=1588364281","width":533}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e*Pricing valid only while inventory is available\u003c\/p\u003e\n\u003cp\u003eThe 262 series are a range of digital panel meters. These meters are versatile in the their measuring range which includes A.C. and D.C. current\/voltage. The 262-DDVU model offers input of 0-10 VDC with a number of display ranges available. The units display can be scaled from 0-1999. The PQ model is powered by 120VAC (See the BD model for 24VDC options).\u003c\/p\u003e\n\u003cp\u003eThe meter front is totally sealed and when panel mounted with an optional gasket is hose proof to IP66, allowing washing and use in wet areas, e.g. food industry, quarries, portable test gear. \u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003ch1\u003eFeatures\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSealed case front\u003c\/li\u003e\n\u003cli\u003eClear bright LED digits allow easy reading from up to 25 feet\u003c\/li\u003e\n\u003cli\u003eCustomised scaling allows OEM logo and engineering units\u003c\/li\u003e\n\u003cli\u003eAdvanced and rugged design allows simple installation and use\u003c\/li\u003e\n\u003cli\u003eUL Approved File No. E203000\u003c\/li\u003e\n\u003cli\u003eIP66 (front of panel using optional gasket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003cp class=\"hidden\"\u003e\u003cstrong\u003e262-DDVU-MTSM-PQ-61\u003c\/strong\u003e:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-750, Power Supply 120VAC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTSF-PQ-61:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-500, Power Supply \u003cspan\u003e120VAC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*All units can be scaled between 0-1999 to your application by our technicians.\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003e\u003c\/h2\u003e"}

{"id":4445134585929,"title":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 24VDC Power Supply","handle":"crompton-262-series-led-digital-indicators-10vdc-input-24vdc-power-supply","description":"\u003cp\u003e*Pricing valid only while inventory is available\u003c\/p\u003e\n\u003cp\u003eThe 262 series are a range of digital panel meters. These meters are versatile in the their measuring range which includes A.C. and D.C. current\/voltage. The 262-DDVU model offers input of 0-10 VDC with a number of display ranges available. The units display can be scaled from 0-1999. The BD model is powered by 24VDC (See the PQ model for 120VAC options).\u003c\/p\u003e\n\u003cp\u003eThe meter front is totally sealed and when panel mounted with an optional gasket is hose proof to IP66, allowing washing and use in wet areas, e.g. food industry, quarries, portable test gear. \u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003ch1\u003eFeatures\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSealed case front\u003c\/li\u003e\n\u003cli\u003eClear bright LED digits allow easy reading from up to 25 feet\u003c\/li\u003e\n\u003cli\u003eCustomised scaling allows OEM logo and engineering units\u003c\/li\u003e\n\u003cli\u003eAdvanced and rugged design allows simple installation and use\u003c\/li\u003e\n\u003cli\u003eUL Approved File No. E203000\u003c\/li\u003e\n\u003cli\u003eIP66 (front of panel using optional gasket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003cp class=\"hidden\"\u003e\u003cspan\u003e262-DDVU-MTSM-BD:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e262-DDVU-MTSM-BD-61\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-750, Power Supply 24VDC\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTSF-BD-61:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-500, Power Supply 24VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTRS-BD-61:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-250, Power Supply 24VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTTM-A2-61\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-1999, Power Supply 12-48VDC\u003c\/p\u003e\n\u003cp\u003e*All units can be scaled between 0-1999 to your application by our technicians.\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003e\u003c\/h2\u003e","published_at":"2020-04-30T08:09:33-06:00","created_at":"2020-04-30T08:26:57-06:00","vendor":"Crompton","type":"Crompton","tags":[],"price":17500,"price_min":17500,"price_max":17500,"available":true,"price_varies":false,"compare_at_price":29000,"compare_at_price_min":29000,"compare_at_price_max":29000,"compare_at_price_varies":false,"variants":[{"id":31451327561801,"title":"Scaled: 0-750 (262-DDVU-MTSM-BD-61)","option1":"Scaled: 0-750 (262-DDVU-MTSM-BD-61)","option2":null,"option3":null,"sku":"262-DDVU-MTSM-BD-61","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 24VDC Power Supply - Scaled: 0-750 (262-DDVU-MTSM-BD-61)","public_title":"Scaled: 0-750 (262-DDVU-MTSM-BD-61)","options":["Scaled: 0-750 (262-DDVU-MTSM-BD-61)"],"price":17500,"weight":907,"compare_at_price":29000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31451327529033,"title":"Scaled: 0-500 (262-DDVU-MTSF-BD-61)","option1":"Scaled: 0-500 (262-DDVU-MTSF-BD-61)","option2":null,"option3":null,"sku":"262-DDVU-MTSF-BD-61","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 24VDC Power Supply - Scaled: 0-500 (262-DDVU-MTSF-BD-61)","public_title":"Scaled: 0-500 (262-DDVU-MTSF-BD-61)","options":["Scaled: 0-500 (262-DDVU-MTSF-BD-61)"],"price":17500,"weight":907,"compare_at_price":29000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31451327594569,"title":"Scaled: 0-250 (262-DDVU-MTRS-BD-61)","option1":"Scaled: 0-250 (262-DDVU-MTRS-BD-61)","option2":null,"option3":null,"sku":"262-DDVU-MTRS-BD-61","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 24VDC Power Supply - Scaled: 0-250 (262-DDVU-MTRS-BD-61)","public_title":"Scaled: 0-250 (262-DDVU-MTRS-BD-61)","options":["Scaled: 0-250 (262-DDVU-MTRS-BD-61)"],"price":17500,"weight":907,"compare_at_price":29000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31454785830985,"title":"Scaled: 0-1999 (262-DDVU-MTTM-A2-61)","option1":"Scaled: 0-1999 (262-DDVU-MTTM-A2-61)","option2":null,"option3":null,"sku":"262-DDVU-MTTM-A2-61","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Crompton 262 Series LED Digital Indicators, 10VDC Input, 24VDC Power Supply - Scaled: 0-1999 (262-DDVU-MTTM-A2-61)","public_title":"Scaled: 0-1999 (262-DDVU-MTTM-A2-61)","options":["Scaled: 0-1999 (262-DDVU-MTTM-A2-61)"],"price":17500,"weight":907,"compare_at_price":29000,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic.jpg?v=1588256819","\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterCutout.png?v=1588256819"],"featured_image":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic.jpg?v=1588256819","options":["Model"],"media":[{"alt":null,"id":6053126111305,"position":1,"preview_image":{"aspect_ratio":1.661,"height":174,"width":289,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic.jpg?v=1588256819"},"aspect_ratio":1.661,"height":174,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterPic.jpg?v=1588256819","width":289},{"alt":null,"id":6053126176841,"position":2,"preview_image":{"aspect_ratio":2.348,"height":227,"width":533,"src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterCutout.png?v=1588256819"},"aspect_ratio":2.348,"height":227,"media_type":"image","src":"\/\/kingswayinstruments.com\/cdn\/shop\/products\/Crompton262PanelMeterCutout.png?v=1588256819","width":533}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e*Pricing valid only while inventory is available\u003c\/p\u003e\n\u003cp\u003eThe 262 series are a range of digital panel meters. These meters are versatile in the their measuring range which includes A.C. and D.C. current\/voltage. The 262-DDVU model offers input of 0-10 VDC with a number of display ranges available. The units display can be scaled from 0-1999. The BD model is powered by 24VDC (See the PQ model for 120VAC options).\u003c\/p\u003e\n\u003cp\u003eThe meter front is totally sealed and when panel mounted with an optional gasket is hose proof to IP66, allowing washing and use in wet areas, e.g. food industry, quarries, portable test gear. \u003c\/p\u003e\n\u003cp\u003e\u003c!-- split --\u003e\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003eOverview\u003c\/h2\u003e\n\u003ch1\u003eFeatures\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSealed case front\u003c\/li\u003e\n\u003cli\u003eClear bright LED digits allow easy reading from up to 25 feet\u003c\/li\u003e\n\u003cli\u003eCustomised scaling allows OEM logo and engineering units\u003c\/li\u003e\n\u003cli\u003eAdvanced and rugged design allows simple installation and use\u003c\/li\u003e\n\u003cli\u003eUL Approved File No. E203000\u003c\/li\u003e\n\u003cli\u003eIP66 (front of panel using optional gasket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\n\u003ch2 class=\"hidden\"\u003eSpecifications\u003c\/h2\u003e\n\u003cp class=\"hidden\"\u003e\u003cspan\u003e262-DDVU-MTSM-BD:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e262-DDVU-MTSM-BD-61\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-750, Power Supply 24VDC\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTSF-BD-61:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-500, Power Supply 24VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTRS-BD-61:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-250, Power Supply 24VDC\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e262-DDVU-MTTM-A2-61\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInput: 0-10 VDC. Scaled: 0-1999, Power Supply 12-48VDC\u003c\/p\u003e\n\u003cp\u003e*All units can be scaled between 0-1999 to your application by our technicians.\u003c\/p\u003e\n\u003ch2 class=\"hidden\"\u003e\u003c\/h2\u003e"}